Jump to content
SAU Community

Recommended Posts

Stock R32 GTS-T *Exhaust Manifold $20 ono

*Dump Pipe $15 ono

Jaycar 6.5" Splits (Silver ones) with crossovers tweeters etc. $40SOLD

Windscreen Wiper Motor $15 ono

Hicas Pump $20 ono

R32 Heater Motor $20 ono.

R32 Brake Master Cylinder $15 ono

R32 Clutch Master Cylinder $20 ono SOLD

R32 Ash Tray $10

R32 Grey Glove Box with Lock $10

Location Northern NSW 2460 will freight anywhere

Link to comment
https://www.sau.com.au/forums/topic/61771-various-parts/
Share on other sites

ryan, its nic danger the guy who bought the turbo off you from ebay. mate that turbo was shagged it had cracks in bouth housings and the shaft was bent. i tried contacting you 4 times and never get a reply you told me the turbo was fine except some little chips on the exhaust wheel. you ripped me off and then didnt get back to me after my 4 attempts to contact you :argue:

I took the turbo to GCG turbochargers and they said they wouldnt even rebuild it as the housings were shagged.

Its funny how the internet is such a small place.

I ended having the turbo recod using new housings, shaft, bearings, thrust collar and plates. i had to pay $300 for housings and then $1100 for the reco.

I think i am entitled to some sort of compensation.

and if you dont want to refund me part of the purchase price then atleast work something out with me.

Link to comment
https://www.sau.com.au/forums/topic/61771-various-parts/#findComment-1169727
Share on other sites

Pm sent.

Ive already explained to you about the turbo.

Ive given you my number and if you would like to continue this feel free to drive to my house and see me.......

Link to comment
https://www.sau.com.au/forums/topic/61771-various-parts/#findComment-1170120
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...