Jump to content
SAU Community

Recommended Posts

Hello all.

Tonight I went to take my Stag for a good run as I'm about to go away for a month.

When I put my foot down though things went pear shaped. It started what felt to me like it was missing a bit. The power wasn't smooth at all. And the exhaust was spluttering like it does when it changes gears if I'm fanging it.

I hope someone can understand what I'm talking about and tell me it's nothing major. I haven't checked anything yet as it's dark outside. Not real sure where to look either.

Sorry about the vagueness of ther message. Any help or info would be awesome.

Thanks guys.

Zane.

Link to comment
https://www.sau.com.au/forums/topic/61835-my-babys-playing-up/
Share on other sites

  • 1 month later...

Similar experience......ours started playing up a bit after the long run (400 k's straight). It would miss occasionally under load and drop a cylinder at idle sometimes. As usual, first guess would be plugs. It was my undertanding that it had new plugs put in during the compliance process, but I figured I might as well check them anyway.

The plugs sure looked new but they were Autolites, APP 3924-11's. Now I have never had much luck with Autolites, and 1.1 mm is way too big a gap. So in went a set of the usual NGK BCPR6ES's gapped to 0.8 mm. Bingo no miss, runs perfectly and I am sure makes more power.

I don't know whether anyone else has checked their plugs since compliance, but it might be worthwhile as both burkey22 and I have had similar problems.

:P

When I checked mine they were the factory ones (only had 57k). I didn't bother waiting for it to play up. I scored a set of Iridiums from a mate that used them for about 2 months for nothing ;) . Already gapped to .8mm in the right heat range too, and chucked them straight in :D

I had the spark plugs replaced - the originals were still in the car. Had injectors cleaned, transmission and diff oil replaced...

Car still misses and does strange things with the g box swapping gears while cruising and not changing down when cornering...

Apparently no cracks in the coils. Been told it might be air flow meter or fuel flow sensor thing - as the car does not exhibit the problems consistently, the auto electrician/mechanic couldn't find any faults, so have to wait until the car misbehaves consistently ;)

Just looked at the part number of plugs that were installed - NGK BKR5EIX-11 - now would these plugs have too large a gap and be too 'hot' for a standard stag engine with out mods apart from a panel filter?

Would the larger gap also make the car feel a little sluggish apart from the possibility of mis-firing? I am wondering whether the problems I am still experiencing with the odd running of my car is now also due to incorrect spark plugs... any comments?

:)

Just looked at the part number of plugs that were installed - NGK BKR5EIX-11 - now would these plugs have too large a gap and be too 'hot' for a standard stag engine with out mods apart from a panel filter?

Would the larger gap also make the car feel a little sluggish apart from the possibility of mis-firing? I am wondering whether the problems I am still experiencing with the odd running of my car is now also due to incorrect spark plugs... any comments?

:P

The -11 = 1.1 mm and from my experience that's too big, particularly at more than standard boost. I used 0.8mm on the NGK BCPR6ES, actually they came as -8, but I still checked the gaps. I use BCPR7ES in the race car, but they are too cold for lots of traffic driving. Hence the 6's are the go.

My suggestion would be to gap them down to 0.8mm, the heat range shouldn't cause the missfiring.:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...