Jump to content
SAU Community

Advice Needed

Jonneh Bravo

By Jonneh Bravo,
in Australian Capital Territory

 Share

Recommended Posts

Jonneh Bravo Grand Master

Jonneh Bravo

Posted
Posted

hi guys just looking for some good suggestions about a noise thats coming from my car. Its coming from the suspension or from the bushes. I have taken it to for different places and all have given me 4 different answers. i really dont want to spend money on fixing the 4 different things and then find out it was something simple. This is what i was told - ANSWER 1- Bushes are fine but u need to change ur front shocks.

ANSWER 2 - Everything is ok. your bushes are supposed to squeek as they are made from that type of rubber.

ANSWER 3 - Before we look at it we suggest you change all 4 shocks and springs and then we can identify the noise because it is sitting on the bump stops???( which i dont think so)

ANSWER 4 - The front bushes come loose i tightened them and now they should be fine. 30 mins later same noise again.

All these suggestions i have had are fine but the funny thing is this noise on comes in the mornings when it is cold and on cold nights. During the day when it is sitting in the sun all is good and my head is peaceful as i dont hear any squeeks.

Any suggestions on what it could be??? or where could i take it??? This noise is really becoming a joke and embarrases the hell out of me when i am going for a crusie and all u can hear is squeeking. :wassup:

so all criticism and suggestions are welcome. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/62508-advice-needed/
Share on other sites
race_snooze Grand Master

race_snooze

Posted
Posted

as the rubbers cool they shrink so as to then move a round slightly within the sockets, as they heat up they expand so the squeaking stops, that is the best answer i can give you. I would take it to howard revell if you have not allready.l

Link to comment
https://www.sau.com.au/forums/topic/62508-advice-needed/#findComment-1177689
Share on other sites
mjfawke Collaborator

mjfawke

Posted
Posted
as the rubbers cool they shrink so as to then move a round slightly within the sockets, as they heat up they expand so the squeaking stops, that is the best answer i can give you.  I would take it to howard revell if you have not allready.l

Well.... no actually. 'Stock' suspension bushes (eg. lower control arms) are rubber bonded to an inner and outer sleeve, with the outer press fit in to the suspension member, and the inner clamped by a through bolt. They don't shrink/expand, and they don't move around.

Link to comment
https://www.sau.com.au/forums/topic/62508-advice-needed/#findComment-1177702
Share on other sites
mjfawke Collaborator

mjfawke

Posted
Posted
thats what on of the guys said also. but only one has said that.

That doesn't really answer the question...

Assuming you do have poly bushes in the suspension, then squeaking is normal, and you should disassemble and re-grease the bushes. Use a molybdenum grease or assembly lube - don't get it on your skin, however...

Link to comment
https://www.sau.com.au/forums/topic/62508-advice-needed/#findComment-1177981
Share on other sites
mjfawke Collaborator

mjfawke

Posted
Posted
Ed lubed them all up but it still does it. what changing all the bushes help. why does it only do it in cold weather

Well - you don't lube the rubber bushes, so I guess you must have polyurethane. Was it lubed with moly? Regular greases don't to the trick.

Polyurethane is a plastic, so it is affected by temperature to some degree. All of the poly bushes squeak, even the graphite impregnated ones. Some people add a grease nipple so the bushes can be greased in place (not sure how effective this is, as the grease needs to get down to the centre support tube and the ends).

Link to comment
https://www.sau.com.au/forums/topic/62508-advice-needed/#findComment-1178111
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...