Removing R33 Front Rotors

[leech_]

Hey guys i am pretty sure i know the answer to this but and having am getting majorly pissed off. The rotors on the front of a 33 gts-t i have removed the caliper and looking at the new rotors i have it should just slide off over the hub but the things being a bitch. their is no hidden screws or bolts is their ??? i am going to leave some wd 40 on the wheel bolts and around the centre cap hopefully after a little while she will come loose

[leech_]

dont worrie issue resolved alot of WD40 and a fair bashing on the edge of the disc with a rubber mallet has seen her come loose

[leech_]

also just for peoples information if they are doing the same thing the two holes which you can out screws in with a proper device. If you just keep turning the screws they will slowly push the rotor away from the hub as well. You may burr the screws a little but the good thing is it doesnt do anything to the rotor

[strutto]

also just for peoples information if they are doing the same thing the two holes which you can out screws in with a proper device. If you just keep turning the screws they will slowly push the rotor away from the hub as well. You may burr the screws a little but the good thing is it doesnt do anything to the rotor

Yep that's how it's done...

[leech_]

lol strutto we only worked that out on the second rotor originally i thought it went all the way through to the hub so we didnt try it till we had got the first one off and noticed hmm that would make life alot easier.