Jump to content
SAU Community

Recommended Posts

NF,

Yeah the thread I posted didn't really say anything definite, and a lot of crap was posted, but I just thought I'd post it to show dynos read a little differently around the world.

I also reckon the real power figures are in the quarter times. As long as the driving is consistent.

Cheers,

Michael

DYNO's ARE FOR TUNING!

There is no real point in comparing different dyno readings between cars on different dynos. Unless you are a bit bored.

If you are tuning your car , going back to the SAME dyno makes alot of sense.

The 1/4 mile is a sport and not a very strict indicator of power, there are even more variables than comparing dyno results. ie: if you don't get the right equipment to play the sport you may not do too well. Like playing golf with a hockey stick.

I guess asking for peoples dyno results with a similar car setup will give you a range, which if your car fits between can give you some peice of mind that nothing is terribly wrong.

What does doing a dyno run in a lower gear do to your figures? I assume the torque will read higher because there is more of a mechanical advantage, and the power will read lower because the engine is physically doing less work to get the extra torque.

Does anyone know roughly how much I should adjust the figures if the dyno run was done in 3rd instead of 4th? Assuming factory R33 GTS-t gearbox ratios (I don't know what the ratios are).

Originally posted by Duncan

I've just run today and I'm having trouble beleiving the results.

164rwkw from a R33 with 11psi, no other mods.

Seems way too high to me.  Perhaps its just blue cars make extra power.

Yeah right - blue cars !! he he

I reckon the extra Kilowatts came from the energy permiating from the two good lookin blokes in the back seat at the time of the run....:D:)

Seriously, with your sticky tyres and the extra weight in the back, I reckon there was less slip against the Dyno hence the better results. :cool::) (that sound like BS to me actually.)

Duncan , last time I ran there - I got 150rwrw with std boost and a cat back zorst - so a few extra PSI could make the 13rwkw diff, maybe ???

Originally posted by Duncan

I've just run today and I'm having trouble beleiving the results.

164rwkw from a R33 with 11psi, no other mods.

Seems way too high to me.  Perhaps its just blue cars make extra power.

It depends on how the dyno is callibrated and what gear the run was done in. What was your torque out of interest?

Hi Jim,

Done in 4th gear. Unfortunately, the graph only has Air/fuel and power on it. I'm sure they logged torque as well, but I don't have the figures.

I think Broken got the figures for all cars, he might be able to post them. While good traction would have helped (definately no wheelspin there!), I suspect its a friendly dyno....

I dyno'd my car yesterday also (with Broken and 25 other Skylines)

Specs:

'95 GTS-T

Cat Back 3" Exhaust

HKS Air Filter

FMIC

2 Stage boost controller

First time i've ever had it done (only had the car 9wks)

7psi = 169 rwkw

12psi = 192 rwkw

Not bad for a first run , I was extremely impressed.

All i need now is a CAI, Side windors Tinted, oil change and my driver side window fixed and i think i'll just throw fuel in her for the next 3-4mths while enjoying the ride.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
    • Hey guys,  Way back when (about 15yrs plus), I picked up a beautiful set of Tein 'Super Racing Spec Circuit Master RE' coilovers from Russman. I have legit never fitted them to my car, as it was garaged indefinitely while i bought a house Yada Yada. They look brand new! Anyway its time to pick up where I left off, and have started doing some khanacross and am booked in for a hill climb next month. The car has some hard af Nismo shocks in ATM, which has me wanting to upgrade again, and now I am left wondering if it's worth having these teins rebuilt? I think they where an ok shock back then, but how do they compare to what's on the market now?  Shockworks/mca are 2800+, and I am sure they are great. But if I can have these rebuilt and be better than, say, a set of bc's for around the cost of bc's, I would be happy with the performance v cost trade off.  If they are considered outdated and rubbish these days, so be it, I'll put them on the shelf and be happy to look at the pretty green colour while I save for the SW/MCA option. Grateful for your thoughts on the matter, and suggestions on who could do the rebuild if it's a worthwhile pursuit.  cheers, Rowdy. 
×
×
  • Create New...