Jump to content
SAU Community

R31 Skyline 12mts rego $2500

CEF11E

By CEF11E,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

I recently had my car stolen so i bought an R31 aus spec skyline as a replacement but my car was returned!!!!!! so i will be selling the skyline.

I have had it for 2 weeks and it is an excellent car and i almost dont want to sell it but i cant keep 2 cars. I am selling it for $2500 and i paid more than this for it plus i just had the aircon fixed and gave it a full service.

R31 1989 Midnight Blue completely stock. The car does not have a single dent!

Manual rb30 3 litre engine, Air Conditionin just been regassed and it is perfect

4 new tyres and i just had it dynotuned and serviced and it is mecanically excellent.

It puts out 101RWKW i have the dyno sheet to proove it!

this would make an excellent first car or a daily driver or for $2000 build yourself a rb30det 260rwkw sleeper!!! thats what i was going to do with it!

9.jpg

10.jpg2.jpg

Interior: fair to good condition, there are no rips or cracks anywhere but it doesnt look brand new.

Extirior: the paint on the boot, bonett, roof is faded but i can have it repainted for the buyer for $300 professionally by a mate.

Known issues: The odometer reads 137,000 but it is not correct the previous owner informed me it stopped in 2001 and has approximatley 180,000 ks on it and i belive them as the car drives and looks in excellent condition.

Link to comment
https://www.sau.com.au/forums/topic/63092-r31-skyline-12mts-rego-2500/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • MBS206
      Chris' Toyota Mark ii JZX110

      By MBS206 · Posted

      I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...