Jump to content
SAU Community

Recommended Posts

Bushes sit between moving metal parts. They can help absorb shock as well as the prevention of wearing of metal parts. Different bushes have different hardness - usually stock ones are on the soft side to give driver comfort and realistically aren't designed for agressive driving. Upgrading to poly bushes or similar can make a noticeable difference to the firmness of handling and IMHO are a worthwhile upgrade.

Steve

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-95219
Share on other sites

FYI

I just called a whiteline distrubutor here in vic, and I got some prices for polyeurathane bushed for an R33

Front control arm uppers: $145

Strut to chassis (front): $107 ($63 for standard)

Rear control arm upper: $??? (no price)

Rear sway bar mount to chassis: $14.44

these guys are in 28 Ovata drive, Tullumarine

ph: 9330 1166

I'm getting a squeek from the front in the mornings when the car is cold. I dont suppose any1 has had the same, and changed their bushes. Its just that I haven't looked at them yet, but i was sondering which of the 2 it is likely to be...

Zahos

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-95386
Share on other sites

inark:

Pineapple rings are used for one of 3 different applications. They can be set up for drag (increased rear squat on launch), drift (opposite of drag) or general performance (in between). They also help reduce axle tramp.

Zahos:

Sorry I didn't mention this before, whiteline also do 'handling' kits - buy as a kit and save a few bucks - may be worth a look.

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-95395
Share on other sites

  • 2 weeks later...

I have a '95 R33 GTS-T and it has after-market suspension, when i drive on some bumpy roads i get rattles (i think only from the rear), i always thought it was just the jack or something in the boot moving around but the previous owner said i need to get "bushes" coz its metal on metal and thats the sacrifice u make for having good suspension.

How do i know what set of bushes i need ? there are like 243 different products on www.whiteline.com.au

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-102256
Share on other sites

also try superpro

http://www.superpro.com.au

they make the polyurethane bushes whiteline sell, or so the suspension guy told me. they are blue, not yellow, and cheaper, thats all the difference, same parts and quality.

Ive just done the castor bushes in my s13. much nicer.

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-102374
Share on other sites

Benm,

Do you have coilovers? I have then and they will give you a rattling sound, that is because they don't necessarily use rubber between the spring and the top of the suspension, therefore when you go over a stiff bump the spring compresses and then rattles against the metal of the chassis.

If you dont have coilovers thenI don't have any suggestion.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-102614
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...