Jump to content
SAU Community

Recommended Posts

Hi Guys,

Im going to Tokyo in a few days and thought id try and buy parts over there.

Any ideas where to go, prefer if they could handle a bit of english too..

Im pretty much only looking for ECU's, boost controllers and maybe suspension..just stuff thats easier to carry back..

I'll be around Shinjuku and Shibuya area...

Any ideas??

mC

Link to comment
https://www.sau.com.au/forums/topic/63714-tokyo-where-to-buy-parts/
Share on other sites

There is an Autobacs not too far from Shibuya in Daikanyama, the following link will open a page to the info for that store, you could try printing it (if you can) and having someone guide you there. Even giving the map to a taxi driver might work. Autobacs is not the best place, I would suggest Super Autobacs as they definitely have more stuff, but there isnt one near Shibuya or Shinjuku as far as I can remember.

http://www.autobacs.com/cgi-bin/inetcgi/sc...h_02&tcd=113083

Good luck,

LegnumVR4

Hi Legnum,

Thanks for the advice...where is the best place to get parts in terms of price and accessibility within tokyo?

I plan to buy a 1 day JR pass which lets me travel all around any JR line for free all day long (please tell me this still exisits :D)....

I already thought about autobacs..but cudnt find any links on the net..Jap sites are too hard to search for...

I also tried to look up Autobacs Second hand market, and it appears to only exist @ Tokyo Bay which isn't too bad to get to

btw: that link didn't get me anywhere cudnt load the page...

mC

Of the cheaper places on your side of tokyo you've got Howars (about 20 mins on the seibu shinjuku line, bit under 1 km from the station) or Border (a bit further out, bit more of a hike from the station). Running around Tokyo (but staying in the 23 wards) you've got Hirano to the north (about 20 mins walk/short bus from nishiarai station on the hibiya line) and in the east carshop nagano which is about 15 mins walk from aoto station (take the yamanote round to nippori and take the keisei line from there). These places on average will be about 20% cheaper than super autobacs

If omg is talking about Border racing in Ome, it is a F#$king hike from Shinjuku. and quite a decent taxi ride from Ome station. plus they don't have a whole lot of stock, and their parts are not that cheap. Nagano is good though.

True, border is a fair way out and we've only gone there when we've been going out to Jun.

soop - they are discount performance parts shops which sell just about anything and generally have a better range than super autobacs (for the performance stuff). Personally I'd recommend nagano, I get almost all my parts through them, they give a good service and have very good prices. If you're there for only a few days try to get out there first as if there's anything you need ordered it will give you time, then you can either pick the parts up on the way to the airport or they'll send them to the hotel you're staying at. If you send me a pm with your email I can send you a map.

nagano is closest to Aoto station. maybe spelt ayoto. I forget. OMG's advice is sound too. go to your parts shops on the first day so they can order the stuff you need (if its not in stock).

have fun.

I've actually got a map from mapfan with everything written in english which is a bit easier for non japanese speaking people to follow, means you can walk (about 15 mins, it's a short stroll) from the station. Kato will give you a lift back to Aoto after you've finished shopping as well.

Hmm, actually, soop if you're going to be there in the next couple of weeks speak up and I can take you out there myself

Borders is like down the street from us, about 10-15 mins away, hehehe.

Anyways, as far as parts for cheap goes, best bet is the second hand stores which can be found anywhere in japan, UpGarage and Parts Off, to name some of them.

as far as Autobacs goes, its everywhere, its like Autozone for the US and i dont know what the australian version is. The Autobacs in Tokyo Bay is a site to see, its a Super Autobacs they have like starbucks coffee and stuff in there too.

If you are staying around Tokyo then this one is a good one to see. I heard (I haven't been there yet) that they have crap load of stuff. here is the website if you wanna check it out. http://www.hasegawa-net.com/index.html enjoy ur stay.

Hasegawa is the best of the secondhand places I've been to in tokyo, fair bit of stuff with decent prices sorta a bit similar to an australian wrecker, much cheaper than the "it's secondhand parts but we'll lay the shop out like it's new parts" upgarages. Excellant for turbos (especially big ones), good for brakes, fair bit of driveline stuff, lots of suspension bits (though the coilovers are almost all crap), fair few seats, exhausts etc, very very few electronic parts.

soop, if you can't find aoto station you're going to be in bother :D Follow the Toei Asakusa/oshiage line out to where it hits the keisei, thats aoto. 22nd is a bit late for me unfortunately, I'm only really free for the next couple of weeks

yukz2daizzo: hey where is up garage located?? im pretty much looking for a power FC and a boost controller..jsut easy stuff i can transport back in the suitcase hehe

i think i might end up @ Super autobacs in tokyo bay hehe seems to be the easiest place..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...