Jump to content
SAU Community

Recommended Posts

Hey guys,

As some of you may have read I purchased my second skyline last week which was a 1992 R32. The car is fantastic but I have two small gremlins that I was wondering if you guys could shed some light on for me:

1) The car is the skyline red moron colour- I need a small amount of touch up paint and the tag in the engine bay with the colour code is so faded I can't read it- Does anyone know the colour code for this paint????

2) The other most annoying thing is the heat factor! My climate control seems to pump out 32 degree head around my feet even when the climate control is off or at 18 degrees. Luckily it's been bloody cold the last few days so I haven't minded too much however it will be annoying to say the least when the mercury rises again!

3) Also chasing a good place to do front mount piping in the North side of the city.

Look forward to catching up with you all at the next cruise and if you can help me kill these gremlins in the R32 I will love you all forever- (in a non-sexual way)

Jev

Link to comment
https://www.sau.com.au/forums/topic/63777-packing-heat-in-the-skyline/
Share on other sites

I''m not sure?? All my AC setup looks fine but doesn't work. The other thing it does is heat up the area around the head unit and clutch which can't be doing the wiring any favours as it gets so hot!!

I might take it to a friend of mine that is a automative engineer to see what he thinks.. Will post it here if I find the solution.

Robin- The windows down option is all good unless your sitting in traffic!

At the moment I have an R32-Sauna Spec!!!

tried switching it from outside rotating air to inside?? when u have it so it vents from outside which in a 32 it is by default, u have to switch it to inside circulation to stop air from outside coming in...

if ur aircon doesnt work and doesnt ge cold go get it regassed... remember they degas them when they come into the country.

no worries... i remember i had a similar issue when i got mine... wouldnt drop at all... try FC which is when u turn it on and adjust the temp hold the - button til its on the lowest and then keep holding it... FC should show up on the little screen thing... leave it on like that for 5 mins and see if anything changes...

also check the hose running from the little vent down near the gearstick on the right top part near the ash tray... you actually have to take off the gear surround to get to it. Sometimes when stereos are installed and taken out they crimp this and this help monitor the temp in the car.

almost forgot... u should be able to check if the gas is actually there by checking that metal tube with the square metal section with a glass window... if u have the AC on and u check that glass window you should see shit in there flowing through.

from memory its in the front of the radiator behid the bar

1) The car is the skyline red moron colour- I need a small amount of touch up paint and the tag in the engine bay with the colour code is so faded I can't read it- Does anyone know the colour code for this paint????

tell us your vin number and the fast software will spit out the color code

The other most annoying thing is the heat factor!  My climate control seems to pump out 32 degree head around my feet even when the climate control is off or at 18 degrees.  Luckily it's been bloody cold the last few days so I haven't minded too much however it will be annoying to say the least when the mercury rises again!

hmm....what degree does the climate control shown when you turn it off?? coz if you set it at for example 32 degree and you turn it off...then the heat will still come out....that's what happened to my s14a

hmm....what degree does the climate control shown when you turn it off?? coz if you set it at for example 32 degree and you turn it off...then the heat will still come out....that's what happened to my s14a

thats why i said u have to set it to recirculate air rather than pull air from outside which pushes the air through the vents when moving.

I had a similar prob with the air always being hot when I got my car. It ended up being a little motor or something under the dash near the top of your left foot. It wasn't working properly and the flap that makes the air hold or cold wasn't shutting. It was always as hot as it would go. Sorry I can't be too specific, but the dealer I bought it from had it fixed before I picked the car up, so I didn't have to fix it myself.

Hope this helps!

Nikr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...