Jump to content
SAU Community

Recommended Posts

I go with the F20C as well - that article is done from a euro point of view as well, the Japanese spec one is around 250ps... ie, the same as an RB25DET :)

They are reliable, sound awesome, light, economical, are smooth, have low emissions, make awesome power for an NA motor (hey, they are higher than a lot of equivalent displacement turbo motors), and are really tractible etc. And they aren't on the razors edge to make that power, do an intake, exhaust, ECU and tuning etc and there is still more to be had. One of my mates was making over 150rwkw on his mildly modded S2000s, which makes for some fun driving :(

There may be some limited run NA motor that matches its peak power/l - but I doubt that motor can match the F20C in the other aspects... it might also be peaky as a mofo and not actually end up being as good an overall performer. The F20C is a jack of all trades in its displacement range.

So if you drive it like a pansy you can get 13.6L/100km and some of you are saying thats economical???

And isn't there a torque difference between an RB25 and an F20C?

As for Chryslers, how is a 225 slant better than a 265 hemi? I've been in a Charger with 265 that could spin the wheels with ease in 3rd and 4th gears at speeds well over 100km/h. Admittedly it idled like a plate of jelly.

Considering standard production engines, Honda make some great ones, F3 and F4 CBR 600 (motorbike) engines, F3 is prolly a better engine but the F4 is fuel injected. The sequential gearboxed on these engines are great.

How can you look past the Ford Windsor V8, designed back in the 1950's, the same basic design is still used in both ford production cars and V8 Supercars.

Turbo 6: RB26DETT (Of course. Closely followed by 2JZ-GTE)

N/A 6: Hard pick, 265 Hemi (1/4 mile champ for all Aussie made cars till 96-V8s included) over 186 red motor (need some work to make em go, but they rev like mad for an old pushrod heap).

V8: 350 Chev- widely regarded as the best bang for buck drag engine available.

Turbo 4: FJ20DET.

N/A 4: the 1400 in my sister's old rwd 323. It took a thrashing ;) , never missed a beat, and was amazingly simple to work on. SOHC & crossflow head not bad for 78.

I wouldn't go past the new BMW 4.8L 2nd gen valvetronic engine. There really is no better car engine in the world. With infinitely variable valve timing AND lift + 4.8L of capacity, what could be better?

If I were to choose a 6, it'd be the VVTi 2JZ-GTE.

If the argument is (and I'm not saying that it is) that the greatest engine is the "winningest" (nice word huh?) engine, then the Chevrolet small block V8 would be first with daylight second. This engine has won in everything from jet boats to speedway and everything else besides. Admittedly there ain't a whole lot of Chevrolet bits spinning around inside them but they were originally a Chevy small block designed by one of the greatest engineers, Mr Duntov.

[And it's fuel efficient in that one can - 'one' I assume being someone limper of wrist - drive to an average of 13.6L/100km (32mpg). Hell, it even looks good, longitudinally mounted as an engine should be.

When is 13.6L/100km 32 mpg? I thing that around 9.6L is 32mpg. What do you think?

[And it's fuel efficient in that one can - 'one' I assume being someone limper of wrist - drive to an average of 13.6L/100km (32mpg). Hell, it even looks good, longitudinally mounted as an engine should be.

When is 13.6L/100km 32 mpg?  I thing that around 9.6L is 32mpg.  What do you think?

13.6 is 19.8 mpg.

Sounds like the pom failed maths

Well the greatest engine of all time has to be.......................

Drum roll

>>>>>>>>>>>>>> Scram Jet Engine <<<<<<<<<<<<<

Well im fitting my scram jet engine next week. Should be able to do 0-100 in a half a second and 100-1000 is .23 of a second, but yeah there is some fearce competition out there with the GTR's so im not overlly confident.... LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...