Jump to content
SAU Community

Recommended Posts

im also in the same situation. My shocks arent "gone" but the car is a 1994 so nearly 10 year old shocks arent gonna perform that flash. Also if youve put in lowered springs, you should change your shocks to match the spring rate anyway.

www.horsepowerinabox.com have some pretty decent Koni shockers that are adjustable. and for about a grand thats pretty good value. i believe non adjustable bilsteins are around that mark anyway, only a little cheaper.

Link to comment
https://www.sau.com.au/forums/topic/6394-shocks/#findComment-95818
Share on other sites

if shocks are completely rooted, if you push on the car, it will bounce up and down until it gradually stops. But if a shock is just worn, which will be the case for most cars with a few years on them, then you wont be able to tell without a shock test from a suspension place.

Link to comment
https://www.sau.com.au/forums/topic/6394-shocks/#findComment-95821
Share on other sites

I've generally found that once a shock starts to pass its use-by date, the ride becomes quite harsh - when you hit even the smallest of bumps, you get a sharp jarring through the suspension.

Checkout Whiteline for some new shocks.

Link to comment
https://www.sau.com.au/forums/topic/6394-shocks/#findComment-95848
Share on other sites

Bilsteins are probably the best value performance shock you can get and they are rebuildable as well. Ohlins may be better but if they're priced anything like motorcycle shocks they will be hella expensive (Try >$800 for *one* Ohlins shock for my motorcycle!)

Should be around $1100 for all 4 corners for Bilsteins, but if you're replacing shocks you may as well get new springs too for another $200 or so. My old springs were rooted as well, the back was lower than the front, and the left side sat lower than the right!

I was originally looking for Koni adjustables which are around the same price as the Bilsteins but apparently you can't get them for R33 GTS-t's at present.

Link to comment
https://www.sau.com.au/forums/topic/6394-shocks/#findComment-95986
Share on other sites

Hippy you can but and it will give better handling but due to the fact that they are lower it will stuff the shocks really quick. You can tell by looking at the shock where the rod that moves up and down goes and oil will leak from there.

Hippy pm me if you are looking for some springs or shocks as i get whiteline stuff. Clint

Link to comment
https://www.sau.com.au/forums/topic/6394-shocks/#findComment-96084
Share on other sites

Originally posted by JimX

I was originally looking for Koni adjustables which are around the same price as the Bilsteins but apparently you can't get them for R33 GTS-t's at present.

I was speaking to RPM perf centre a little while ago and they supply the koni adjustables. They are pictured and priced here:

http://www.horsepowerinabox.com/mall/sk16.asp

if you do some looking around, 1100 bucks for damper adjustable shocks is pretty cheap. The bilstiens are another BIG name, but they are still around a grand, and not damper adjustable.

While i knew bilstein were excellent (standard on mercedes and other expensive cars) I wasnt sure about Koni's credentials, but then i found out that Koni shocks are factory OE on Lamborgini Diablos! So they gotta be decent!

Link to comment
https://www.sau.com.au/forums/topic/6394-shocks/#findComment-96157
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...