Jump to content
SAU Community

17 inch Stern Wheels

gts-wpn
 Share

Recommended Posts

gts-wpn Enthusiast

gts-wpn

Posted
Posted

I have for sale a set of 4 Stern 17 inch rims for sale. These rims are 5 stud, 3 piece racing wheel, pretty sure they are 17x9. It was previously on a R33.

Does have rubber on them but the rubber is not in road worthy condition. Currently has 225-45 rubber on them but, but from what i have been told as well the current size of 225 on the rims are very under sized for the rims, so I asume that you could probably go thicker upto 265's, and at current you can see the damage on the tyres that indicates the tyres are too undersized for the rims.

These rims are great if you want to put some fat rubber on them and use them on track days. I am also pretty sure these rims are forged and 3 rims are in good condition, cause when i bought the car the rims had gutter damage, but in 2004 i had 3 of the rims rolled out and the gutter damage on the edges smoothed out. I want to get rid of these so I'm offering them at only $400 for the lot.

All you need to do is put some new rubber on them and have the edges on the 4th wheel smoothed out(you can have that done for about 60 bucks from Neways wheels). Otherwise the wheels are in good nic. If you have any questions feel free to PM me, I have no other facts about the rims as they came with the car when i bought the car. This is only a local sale within Melbourne as I do not wish them interstate as it would cost too much. I am in Craigieburn so those interested should come and check them out and pick up if wanted. My contact is 0431 645 055 if you want to have a chat regarding them.

PRICE: $400 (pick up only in Melbourne)

Link to comment
https://www.sau.com.au/forums/topic/64067-17-inch-stern-wheels/
Share on other sites
  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...