Jump to content
SAU Community

Recommended Posts

Hi All,

I've done a FAQ for the PowerFC to cover a lot of recent questions regarding the aftermarket ECU. Some of these were covered by myself so I have compiled a list of them and put them into a HTML FAQ. Please let me know if the info is wrong or you would like something added/removed/changed.

Thanks

http://www.skylinesaustralia.com/forums/sh...975#post1203975

great faq !

"Another unofficial mod is instead of buying the official powerfc hand controller extension cord is to use a normal Ps2 extension cord used for

a normal PC computer. Its the same cable you just need to break off one of the pins"

which pin would be handy to have in there

I haven't got a PFC.... but judging from what I know about computer PS/2 Interface... there are 6 pins plus a plastic tab to hold the plug.... maybe the PFC unit has only pings for 5 holes.... so it will plug in after breaking one of the pin...

Anyway... I was going to point out..."A handy trick powerfc owners use when they take car in for a service/work to be done they set the rev limit to 30000rpm and remove the hand controller." Maybe you would like to change that...

hi guys,

would anyone be willing to do a copy of the faq but for some other aftermarket ecus?

wolf 3d would be a good one to start with. anyone willing to do it?

i can host the pages etc if you need space so its no problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...