Jump to content
SAU Community

Recommended Posts

well, as adam said, a stock(driveline wise) aus 31 will be wikid to slide.

they are relatively cheap. but in the end, if your gonnaslide it, things will come up and it gets a bit more expensive. but hey, my RB30 has copped limiter bashings on 40 degree days and she is still going strong.

only mods to my car are shocks, springs, front sway bar and strut brace, minispool, intake pipe, muffler.

joelstevetandem7as.jpg

40771552IMG_2911.jpg

40771484IMG_2649.jpg

40771195IMG_2017.jpg

link0ge.gif

Dsc02372.jpg

  • 1 month later...

Just a piece of advice, the bigger/heavier the car, the dearer everything else will be. Tyres, a diff to take the punnishment, the power needed to keep the car in a slide, gearbox, everything.

If you want to go sideways in a car pick something fairly light to begin with. 4 cylinder will keep things cheap. When you look at AE86's and even sivlias to a degree they are a perfect example. If you only have $5000 I doubt you'll have a decent 31 ready to drift if you also don't have much experience with cars yet.

The other unfortunate thing is that you'll probably have to compromise with a road/drift car. Most things you'd do to a drift car wouldn't be unsuitable/legal for the road.

I've had a turbo silvia which was great and currently own a 31 wagon, which I can tell you now is no nimble piece of equipment especially when close to standard form

If I had to do everything all over again I would get an AE86 or Dastun stanza if you can handle the looks. The AE86 has obvious potential, the stanza is the lightest shell a L20b series 2 bluebird motor will drop straight into, bang a webber on it and spend the rest of your money on wheels/exhaust etc...

For a compromise car I'd say a series 3 bluebird TRX with the CA20 engine. Pleanty of room for mates, reasonably well appointed, not too heavy. The possibility to easily upgrade to a CA18DET down the track would make it a good choice.

I love my 31 but I only chose it as a tow car for my stanza race car and not as a drivers car. That said you can have fun in just about anything if you want to.

R31 as a tow car isn't a great idea - the maximum towing capacity is 1100kg. You won't get a Stanza and a trailer under that. Worse problem is that Hayman Reece class 4 towbar for R31s are only rated at 850kg... it must only have been the factory towbar rated to 1100kg. I wouldn't like to pull that much weight in one - I towed my car trailer unladen (~500kg) in my old SIII R31 and it wasn't nice - you could feel the car being pulled around by the trailer, although my ride height might not have helped that.

L18/20 into 1200 isn't exactly easy, but its dead simple into a 120Y or Sunny. You can use 180B or Stanza crossmembers in those for a bolt-in fit.

you should pick up a decent r31 for around 2-3k

if ur lucky see if you can get a silhouette with a man tranny

but watch out, my cuz bought an r31 sill with a man tranny, and he had 2 spend big on getting it fixed up (it wash shot...it dropped fluid, the gears were rooted, in the end he spent about a grand getting it properly redone and getting a full service on the engine diff and gearbox

and if you get a auto make sure it doesn't get stuck in certain gears ... if i hammer our r31 when rolling (like pulling into a parking area when wet, and getting the back end to go sideways...hehehehehe) it will get stuck in second gear

to get it out again i need to shut down the engine and then start her back up again

but there is no need to worry, just make sure you spend a little while looking 4 a good quality one cause as has been said numerous times, these cars can cop a lot of shit

even though they have relativly low power (compared to like the new 1.8l corolla that has 145kw compared to the 114kw of the r31) the torque of these beasts will leave a corolla in the dust

they take of relativly quick and can be redlined no worries (when mum drives it she often redlines it on take off ... hehe)

they are fun as 2 drive, and especially when turning right from a stop they can leave a nice big black mark (that is without lsd ... the engine rotates, when in the car, clockwise, applying more power to the right hand side, making it easier to leave smoke when turning right)

hopefully all the pros and cons of this car make you buy one, cause they are fun as 2 drive, can cop a lot of shit, and leave a lot of other cars on the road in the dust

dad has pulled in excess of a 1500kg with our r31 (and so have i) and yes the trailer makes it pull around a bit, but as a tow car i reckon they are awesome

the midrange to topend torque means that you can pull around a tonne, and still manage to overtake cars at around 130kmh (from about 90kmh)

we have had our car fully laden, towing a trailer (around 800-900kg) and still managed to overtake cars easily

I really wouldn't recommend exceeding the maximum towing capacity of the vehicle or towbar. Its illegal and unsafe. Its only a matter of time before physics and metal fatigue catch up with you...

but I still miss my R31 as a daily driver. They're a good car, especially for the price.

The type of trailer and positioning of the load is a major factor on a cars ability to tow. I use a light weight trailer and a stripped out stanza and never have any trouble. I would say manufacturers would be more than a little conservative when rating a vehicle's towing ability.

Regarding the L20B into 1200/sunny/120y. I've heard the crossmember thing for the sunny's but I think the L20b is too tall with standard engine mounts. I heard it just hits the bonnet but L18's are OK as they are smaller stroke. Could be wrong but that's what I was told.

Go little datsuns I say!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...