Jump to content
SAU Community

Gearbox oils and notchiness.

BuzLightyear
 Share

Recommended Posts

BuzLightyear Enthusiast

BuzLightyear

Posted
Posted

Somebody recently reported here that gearbox notchiness was improved by switching to Castrol VMX80.

I also have had some degree of notchiness which was really anoying me. I gave the mechanic a drive of my car, which still shifts down quite smoothly, and he was not sure of the cause, that is, whether the synchros were a bit worn or not.I have an R32 which I've only had for a few weeks. When I went to change the oil, I chose VMX80 and decided to give it a Nulon teflon treatment as well, but the filler plug had siezed in the housing, and so I had to give it to the mechanic (Gavin Wood at Autotech here on the Gold Coast). He put the Nulon in, but forgot to put in the VMX80 and instead used his usual fare - a 75/90 of some sort. Result - no improvement.

Today, I decided to drain that mix and just try the VMX80. It has improved the notchiness somewhat, but more importantly because the box now shifts so much easier the notchiness itself now seems a lot less of a problem.... if that makes any sense.

I recall that I had a similar problem with my wife's Corolla. I put 80/90 into it and the box was no better, but switching to a straight 80 as per the manufacturer's recommendations made things somewhat better.

Now I'm going to stay with the 80 weight, but also add the teflon treatment to see if it improves further still.

Link to comment
https://www.sau.com.au/forums/topic/6463-gearbox-oils-and-notchiness/
Share on other sites
gtrken Grand Master

gtrken

Posted
Posted

Redline Lightweight Shockproof ( blue smurf ) . Exxy but worth it. Improves syncro crunch and shift speed .

Have used in 2xGTRS to good effect and no I don't own the company but wished I did !

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...