Jump to content
SAU Community

Lets have a big Ass cruise to the gong! 14/12/02 MEETING SPOT CHANGED!


Recommended Posts

  • Replies 122
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Mr GTS

I Would like to come, but I need to know some more info abt the cruze, if something can let me know would be great!!

Pretty much meeting up around 10:30-11am at carpark 6C at homebushing cruising down to the gong via the nasho get some food and stuff down there and **** around abit then cruise back up :D

Originally posted by ultim8DTM5

ive organised a few barinas to come along (dates are the same, haha) so we are meeting up at 6C as well

:D

except we are meeting up pretty early, like 10ish

ive been informed that rumba is on the same day at the stadium...could make things a bit, ahem, packed?

rumba

hehehe

imagine all the 12yos you will be impressing

:band: :headbang: :rave:

Originally posted by kabab

Pretty much meeting up around 10:30-11am at carpark 6C at homebushing cruising down to the gong via the nasho get some food and stuff down there and **** around abit then cruise back up :D

Thanks Kabab.

Will try and get there, how many numbers so far?

kabab,

I might come for the first time but it all depends how long the engineer takes with my car, a drive to the gong would be good chance to run in the engine. By the way I take it that this is a am meet not pm???

Sorry Fellas - I'm out - No car. It's still in the Workshop - The ppl who were smoothing the inside of the plenum with that paste stuff haven't completed the work they were meant to. Everything else is OK tho. So should have my baby back on Monday.

Have fun ppl.




  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...