Jump to content
SAU Community

Recommended Posts

One of my head lights looks brand new and the other looks cloudy and generally 10 years old. I'm assuming one has been changed at some point and I'd like to change the second one to match it. So, my questions are:

1. Can I replace just the head light cover, or do I need a whole head light assembly?

2. Where can I buy what I need?

3. How much is it going to set me back.

I would call Nissan Spare Parts, but it's almost 9pm at night and I'm sure they'd charge a lot regardless. Or are they the only option?

yeh i would think you would have to get a complete headlight as the whole thing is connected (cant take off the plastic cover to clean the inside).

Wreckers should have them so just get one that looks just about the same i suppose unless you want to fork out the smackaroo's for one from nissan. some people sell lights in the for sale section from time to time, might be worth a look.

As for polishing, it will make the dirtier light better but you would still be able to tell that the newer one is better still.

Mine looked really shit... they were yellow! I had them polished with an electric buffer (with cloth head) and some meguires polish and they look farking awesome now! A friend has brand new headlights and mine look no different. Give it a try. :/

Mine looked really shit... they were yellow! I had them polished with an electric buffer (with cloth head) and some meguires polish and they look farking awesome now! A friend has brand new headlights and mine look no different. Give it a try. :)

mine are a little yellowy.. did u polish the cover from the inside of the light or just from the outside?

also, my lights seem really bright and look as if they're pointed a little high and ppl infront get annoyed that my lights flash in their rear view mirror (they often think i have my high beams on). do i just put weaker bulbs in, or can i adjust the lights to make them point lower?

mine are a little yellowy.. did u polish the cover from the inside of the light or just from the outside?

also, my lights seem really bright and look as if they're pointed a little high and ppl infront get annoyed that my lights flash in their rear view mirror (they often think i have my high beams on). do i just put weaker bulbs in, or can i adjust the  lights to make them point lower?

I only had to polish the outside... a lot of people think the inside needs to be done (as did I at first) but you only need to do the outside. Believe me, it works a treat, they look brand new.

You probably only have to adjust your bulbs, check to see if they sitting in their sockets properly and that the wire bracket is holding them in place correctly. :)

P1E.

You in South Australia?

why dont ya check out Car Toys on (Port Rd [i think])? They do some sort of internal headlight treatment especially for the R33 and soarer front lamps. They come out chrome internally, instead of the ugly dark stuff that comes standard. I cant remember how much they are charging however... i THINK that the Red R33 that used to be owned by the JMS boys had the treatment done, looks pretty nice!

What i do with mine, i use the AUTOSOL metal polish on the outside cover, they come out pretty clear after that anyhow.

If youre not is South Aus, i apologise for my lack in observation!

500 damn im happy with that rma on the coast said it was going to cost me 670 dollers for a second hand one and they are rare to find. Bunch of dicks im sick of people ripping of import cars.
that's bullshit...what a rip off..

ring around some wreckers - one in Adelaide was gonna charge me just over $300 including freight to Canberra.

$670 is ridiculous :cheers:

Yeah i have just decided to leave it until the cops say something about it then i will look into replacing it. At least i have 2 headlights i saw a cop car last night with 1 break light and 1 headlight where is his defect notice. And he was driving through surfers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...