Jump to content
SAU Community

Recommended Posts

Ok, after doing a search (I put brake fluid in, and searched everything in this section) I came up with nothing.

So what brake fluid would be recomended for my car. Nissan cefiro, with a what would seem full R32 brake conversion, on the front DBA4000 slotted rotors with the RB74 pads.

The car gets a bit of a flogging now and then, nothing serious, the plan is to eventually get in to motorkana stuff, and some track days, not to win, just to have fun and 'keep it off the street' so to speek.

PS, if posible Id like the information quick, as the car is going in tomorow to start getting a good fix up.

Link to comment
https://www.sau.com.au/forums/topic/65200-brake-fluid-yes-i-searched/
Share on other sites

Ok, thanks muchly. If anyone else has some imput it would also be nice.

I shall keep everyone updated on how things go.

PS, the master cyl was also leaking so that is going to get fixed up, should be good! :cheers:

Yes indeed it is the best for track applications, but because of its wet temp rating ie works well when water is absorbed... we change ours often.

Some fluids will work almost as well and you can leave in without the threat of corrosion.

TT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...