Jump to content
SAU Community

Recommended Posts

Please note, I have just had Ben at Racepace check out the smoke and he's told me that a cylinder has a cracked piston ring. :boohoo:

I have ot sell the car ASAP before the lease expires.

A chance to get a GTR with an engine that you'll know is good :)

Details:

Late 97 posibly 98 build series 3 (Dual Airbags and Xenon lights) GTR V-Spec

Black exterior

Grey interior, factory leather seats

68,000 KM

Dark tint windows

Carbon look "GTR" rear wing inserts

HKS2530's

233 rwkw @ 1 bar which will no doubt be better after a rebuild

Stock rims

Currently registered in QLD with "97 GTR" Goldcoast Indy plates - most likely to be sold seperately or keep for when I can afford to buy another one

Can transfer vehicle to VIC rego before purchase if required and as such you'll get 12 Months registration.

A few scratches here and there, the front bar, plastic, has a few cracks in it, I havn't replaced it yet as it still has some life in it

Had some minor mods including larger oil sump, oil cooler, 3" pipes off the turbos, HKS2530s has an electronic boost controller (currently disabled), Field Torque split controller, single ( I think) but definately plated clutch. Nismo centre guages and Nismo dash

gtr0337qo.th.jpg

gtr0346ff.th.jpg

gtr0358yr.th.jpg

gtr0361dr.th.jpg

gtr0372rm.th.jpg

gtr0386hk.th.jpg

gtr0398ve.th.jpg

gtr0405ma.th.jpg

Serviced regularly, earlier by Blackburn Nissian and recently by Racepace Motorsports.

Inspections welcome.

located in Mitcham, Victoria

Link to comment
https://www.sau.com.au/forums/topic/65256-29500-r33-gtr-v-spec-97-s3/
Share on other sites

perfect buy...

Get engine rebuilt by Racepace, add injectors if it doesn't have them, powerFC

You'd get a S3 GTR with some nice goodies, with 320rwkw, freshley built engine with forgies... for less than 40k....

Wish this came up 12 months ago when i was looking :D

edit: a friend is interested - got a phone number?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...