Jump to content
SAU Community

Recommended Posts

i jumped into my car this morning turned the key and to my shock the car was shakeing and spluttering all over the place, i gave it a rev to stop it from stalling because on idle it just dies i checked all conections and hoses there ok changeing

sparkplugs tonite. any other ideas the black smoke is makeing me sick realy.

Link to comment
https://www.sau.com.au/forums/topic/65597-r32-wont-idle-black-smoke/
Share on other sites

i cleaned the air flow meter and tested it the car started but with the same result black smoke and spluttering i also cleaned the (acc) aac valve what ever it's called looked fairly clean i removed the plugs and looked at them all of them had blak soot on them. do you guys think my afm is stuffed or somthing else irridums go in tonite

yeah.. I'd say 90% likely to be AFM. AFM controls idle mixtures, so if it's buggered will blow a heap of black smoke, idle irregularly, etc.

A clean might not be enough to fix it. You'll have to try swapping in another one and see if that fixes the problem.

I wouldn't bother with the irridiums, and save the dosh towrds the possible new AFM... that is unless you really were thinking of putting irridiums in anyway.

  • 1 month later...

hey all. i have the same problem with my GT-R32. it happened all of a sudden last night, so i did a search to see if i can self diagnose the problem my self.

on cold idle its fine, but after a few mins it starts to spalter around 500-800 RPM, with black smoke out the exhaust. is this the same problem? and to fix it, is this the same?

thanks

JUSTIN

chears mate... im not into all this mumbo jumbo stuff... but im learning, and for a muscle head like me, i think i know a little.... i have twin airpods and im %99 sure i know where the AFM is located. and cause of the twin airpods, ill have twin AFM's right?

BUT as for the "air flow regulator," whats he look like, and where is he...?

i have wednesday off work, so i plan to pull it all apart give it a decent clean. and i am ment to use break cleaner. thats what its called right?

and as for the coil packs, and spark plugs, i plan to get a full survice done, oil filter relocation and cool kit fitted in about a week... just waiting on payday.

thanks for the help so far.

JUSTIN

ok... get this.......

my car is still doing the same shat. so put it all back together, and left it for a few days. this morning i popped the hood, unclipped the clips that clip on the AFMs and started it up....

Fine. idles the same as before i had the problem.

i let it sit there and idle for a while, jumped in and took it down the street, BUT i couldnt get boost. is this because i unplugged the two plugs and it wasnt reading it???

any-way, i took it home, popped the bonnet, plugged in only one of the clips while it was still running, and the car started to idle real low again. then stalled about 3-5 seconds after plugging it in.

so i unpluggerd it, started it up, and plugged in the secnd. the same resault.

unplugged it, started it up with out the plugs in, and it was fine.

WTF is up with that? have my AFMs shot them selfs??? or have i shot them...

one more question.... whats the difference between an "Air Flow Meter", and an "Air Mas Meter" ??? they both measure the air that comes in right?

Air flow meter is more commonly known as being the kind that have the flap inside and the needle that reads the flap's position. Air mass meter is more commonly the hot wire kind that measures air as a mass. You have an air mass meter. They can be referred to as either but technically that is the difference.

all good now... last week, i had a few days off work, and had a decent look behind the front bumper, and to my suprise the intercooler plumbing blew off!!! yeah thats right - off!!! so i put it on, plugged in the AFMs and off i went.

that was a relife. i thaught i was going to fork out a couple of hunderd bucks to get something fixed which i could have done my self.... which in the end i done my self anyway.

thanks for the help tho.

JUSTIN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...