Jump to content
SAU Community

Recommended Posts

i have them, there is a review on here somewhere, do a search for it.

i've done 3 track days and nearly 15,000ks on them and they are still fine, maybe 50% tread.. hard to tell... road noise is fine. Good road tyre. i have 255/35/18's

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1226043
Share on other sites

I run 235/40/18 fronts and 265/35/18 rears. Currently have about 15-18,000kms on them and they seem to be holding up fine, heaps of tread left. No track time on them yet but for the money they are pretty good. No louder than any other street tyre I've used in the past.

Z.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1233035
Share on other sites

  • 6 months later...

Just bought four 235/45 17" Hankook K104s, since everyone is raving on about this particular tyre.

I havn't yet tested them in wet conditions but they seem like a very comfortable drive, and arn't noisy.

Got them from Jax, rang a few different stores and they all varied in prices! some had the tyres for $30 more!.. Got them for $169 each after some negotiations biggrin.gif also did my wheel alightment front and rears.

Seems like a good tyre so far.. they are rated Y grade and have silica compound too!

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1595506
Share on other sites

I run 235/40/18 fronts and 265/35/18 rears. Currently have about 15-18,000kms on them and they seem to be holding up fine, heaps of tread left. No track time on them yet but for the money they are pretty good. No louder than any other street tyre I've used in the past.

Z.

What did the 265/35R18's cost per tyre if you dont mind?

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1595692
Share on other sites

  • 2 weeks later...

When i bought my hankook ventus k104s the guy at the shop said hankook had been doing a lot of work to improve their sidewalls.

Mine have lasted 20000 kms very well so far, and ive hit many a pot hole.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1615400
Share on other sites

ive heard tyre places that sell Khumo's say they are crap! but ive driven on the ecsta supra's and the k104's, and i have to say that for the price of these tryes, both brands perform extremely well, and by no means are you going to jump up and say "these are cheap tyres!" if someone handed you the keys to the car without telling you what tyres are on the car.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1631432
Share on other sites

Hi Guys,

I have heard great reviews on this tyre and thinking of getting this sometime this week.

I do have a few questions tho. Sorry to steal the thread!

I have 18x8.5 for fronts, 18x10 for rears. For rears, i was thinking of getting 265/35/18. But for the fronts should i get the same sidewall size ie should i get xxx/35/18.

Would having a different sidewall at the front and back, ie, fronts being 40 and rear being 35, make a big difference esp to the tacho, mileage and handling?

The two sizes in 35s i was looking at were, 225 and 245. And in 40, there is 235/40/18.

What would you guys recommend? Would it make a big difference in terms of steering between 225 and 245?

Thanks heaps in advance guys,

:)

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1633590
Share on other sites

  • 2 weeks later...
Hi Guys,

I have heard great reviews on this tyre and thinking of getting this sometime this week.

I do have a few questions tho.  Sorry to steal the thread!

I have 18x8.5 for fronts, 18x10 for rears.  For rears, i was thinking of getting 265/35/18.  But for the fronts should i get the same sidewall size ie should i get xxx/35/18.

Would having a different sidewall at the front and back, ie, fronts being 40 and rear being 35, make a big difference esp to the tacho, mileage and handling?

The two sizes in 35s i was looking at were, 225 and 245.  And in 40, there is 235/40/18.

What would you guys recommend? Would it make a big difference in terms of steering between 225 and 245?

Thanks heaps in advance guys,

;)

I recommend 235/40/18 on the front and 265/35/18 this makes the overall diameter of the wheels the same therefore your speedo will remain unchanged and your steering is not too heavy. It is the perfect tyre setup for a skyline.

Link to comment
https://www.sau.com.au/forums/topic/65627-hankook-k104s/#findComment-1664611
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I might just check it out.. A Q among all those skylines.. lol
    • Time will tell, they're doing all the admin stuff at the moment. I've submitted all the required details, photos, etc.   I was under the impression that DC coupling is the best approach, i.e.: Solar Array -> Battery Invertor -> Battery  Where as AC Coupling is simpler, however less efficient, i.e.: Solar Array -> Solar Invertor -> Battery Invertor -> Battery
    • The price is really great for that kind of capacity. I thought similar setups cost way more. How's your efficiency been with the DC-coupling? I've heard sometimes there can be a bit of a performance loss.
    • Long time no random post about shit. So I went down this deep deep rabbit hole of battery storage for the home, ended up locking in a 41.9kWh Fox ESS EQ4800 with 9 units stacked. Battery uses Lithium Iron Phosphate, similar to what you find in those deep cycle boat/caravan batteries. And yes, why did I go with a cheapie brand and not like Synergy? simply because I don't plan to stay at this house for more than another 3~5 years.  The entire install, DC coupling (removal of existing invertor, connecting the current 6.6kW array direct to the battery invertor), new 8kW invertor is $6K all up (after all the rebates etc.). Going with this lot: https://www.aussiesolarbatteries.com.au/ It did seem a bit too good to be true, however seems like the Whirlpool community has vetted it and when it comes to this kind of stuff, they seem to be all over it: https://forums.whirlpool.net.au/thread/9pxj8482?p=38   I've requested for the battery to be installed outside, next to my meter board and not inside - rather have it combust and ignite outside lol.    
    • In Vic it would be a defect regardless of whether or not you cut a hole in the sheetmetal for the return pipe. The rules in Vic are shitful, and are generally interpreted as you can "make 2 mods to the intake system". Putting an FFP and an FMI onto it will almost certainly be seen as some huge number of intake mods. You really need to speak to an engineer before doing this stuff in VIC.
×
×
  • Create New...