Jump to content
SAU Community

Recommended Posts

Originally posted by Gradenko

DON91E, the 98+ RB25 made 206kW, compare late model SR20s with that if you really must. But really, its pointless comparing stock outputs of differently sized engines.

O shit aye whoops how did i forget about the humble R34 :)

hehehe

Hmm yes that is tru, the sr is not too far off but is it :)

hehehehe

Look i reckon when it comes down to it, its really up to you,

With Meggala's comments, the build quality is not lacking to say the least but its a cheaper car now isn't it,

why don't we have cefiro 's hehehe cuz we not old men pushing around cribs with rings on our fingers ;) heheheh Jk, (o tell us more wise one)

hehehe

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

the cefiro is much cheaper than the chaser and is a nissan and it is a combination of the s13 and r32's the only hassle with them is they never came out in amnaul in the turbo model and they ahve a foot emergancy brake and sincle spot brakes with 4 stud wheel

but yes they can look very fat. and you can fit your nissan engine of choice rb20,25,26 or sr 20

meggala

driftspeccefiro.jpg

Originally posted by meggala

the cefiro is much cheaper than the chaser and is a nissan and it is a combination of the s13 and r32's the only hassle with them is they never came out in amnaul in the turbo model and they ahve a foot emergancy brake and sincle spot brakes with 4 stud wheel

but yes they can look very fat. and you can fit your nissan engine of choice rb20,25,26 or sr 20

meggala

 

driftspeccefiro.jpg

Megs there is a shit load of cefiro's here n taiwan. I seen a few pimped out to the max and they look damn good!

Meggala,

The pic shows it's 5 stud wheel? And the owner's been no good with that car, the rear bar seems to have been smashed prob when drifting...

My parent indeed almost bought one back home, but since Nissan's used car value is very poor there, they didn't buy it. But I wouldn't care as Indonesian version of Cefiro are ALL non turbo. (Back then there was still restriction on luxury and/or any cars larger than 3.0 litre engine due to the old regim govt's crap abt creating social gaps between the poors n riches)

Originally posted by meggala

the cefiro is much cheaper than the chaser and is a nissan and it is a combination of the s13 and r32's the only hassle with them is they never came out in amnaul in the turbo model and they ahve a foot emergancy brake and sincle spot brakes with 4 stud wheel

but yes they can look very fat. and you can fit your nissan engine of choice rb20,25,26 or sr 20

meggala

well well this topic allways starts hehe =)

as for me personally iam imporinting a 180sx 97 with updated interior i mist admit that the skylines have nice interior. better than the 180sx very early models.

i love skylines woundnt mind one my self. but honestly there are too many around. i live in melbourne. I just see heapz of them around because they are getting cheaper and cheper, and also the rush with the new law comming in thats why iam getting a 180sx. somthing a lil differenet.

as for skylines. great good engines but i feel they are too big.

as for 200sx. i think there ok abit heavier than the 180sx iam preety sure and i dont like there handling capabilites.

i think the 180sx have better handling than the 200sx.

but in the end it all comes down to personal preference.

me iam now a 180sx man. basically beucase i didnt wanna be another typical skyline on the block.

I agree with you in regards to interior.

One of the reasons why I bought skyline is I liked the interior better than FTO (almost bought that one). FTO may have sexier body, but I HATED the interior as it squeezed on me, I sat with the car dealer on test drive and we are rubbing shoulders!!!!!!

And I'm not even 6' high!!

R33's interior is more livable, as it's more spacious and looks a bit more modern than R32 or early 180sx. But again, it depends on indiv's preference... I like interior styling circa mid 90s or later, anything older than that, I felt pretty drab.

Originally posted by Jay95R33

Two dolla suckie suckie..... :lol: :bahaha: :bahaha:  

Love you long long time :bahaha: :bahaha: :shake:  

p.s. - bring back one for me too - one that can cook and polish cars well  :D

cook and polish a car? what if she just sucks great di*ck?

i am one of the lucky people to have experienced owning both great cars, current ride is a s15, previous ride r33 GTST

in my view, the s15 beats the r33 mod for mod mainly due to the new technology being installed in the 2002 model i drive

it has r34 suspension aspects and the light weight makes it hammer through corners alot better

the power comes on alot faster and the car is stock, the r33 had power come on alot higher but kept going in the powerband, the s15 comes on fast and in higher revs loses out

i havent modded the s15 but feel it to be faster then my skyline, hell, my s15 can beat a 8psi s14 with a 3in full exhaust and i am still stock

it does come down to driver, the way the engine has been treated would also affect in some way i believe

i sold my skyline and the guy blew the engine up and also found a crack in the diff. lucky for me!!

:)

so i choose s15, still love skylines however, even though there are like 500000000 of them out there

s15 looks alot better anyways, cant wait to start modifying it

Have to agree with u! Ran two S15's (Spec R) last week, lightly modded. First gear pretty much even and 2nd pulled away quite easily. Having that said my car is boosted n thinking back if my car were stock he would of had me on the straight and bends.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...