Jump to content
SAU Community

Recommended Posts

Hey ppls.

Well, I'm about to start manufacture of my AFM to TURBO reinforcement ducts.

I'm going to be making up a bunch of aluminium pipes to splice into the standard duct from the Air Flow Meter to the mouth of the turbo.

Reason?

It is well documented that at boost levels of around 0.9 bar, the standard rubber pipe can suck closed, resulting in everything you would expect to happen with bugger all air getting into the engine.

In hot weather this phenomenon will happen easier as the pipe heats up and becomes softer.

Solution?

I'm making up a section of pipe that will 'splice' into the standard AFM to Turbo duct. You will simply cut the standard Rubber Duct and remove a small section of rib, then insert the section of pipe, then clamp up the pipe and reinstall the new duct.

Construction?

Mandrel bent pieces aluminium, in a raw finsih, TIG welded. No polishing will be done, but if you want to do it when you recieve your pipe, the aluminum is ready for it. There will be sufficient pipe at either end to give a good seal to to the air. The best finish will probably be either anodised or powder coated. I would recommend podwer coating personally.

Currently the R33 rubber duct is down at the fabricators being prototyped, and I expect a sample to be ready around the start of March 2005

Not sure of the final price until I get the samples back but they will be cheaper than what you could do yourself!!

The standard duct will not be able to be returned to standard after fitting the new section of pipe, but the duct will be such that it will be virtually invisible to the untrained eye.

They will fit in a TNT Airbag, so freight anywhere in the country will be $15.

Maybe if somebody in each state wants to be a distributor the freight can be greatly reduced.

So, who's interested??

Please advise your model of car.

R31s

Angry (RB20DET)

AnFz

Total R31 = 2

R32s

-Joel-

Sheepy

Predator

WazR32GTS-T

KICKIN (Ceffy)

FAT32

Jolinator

TurboX

26GTS

tkch55

sskylinee

Memph

Total R32 = 12

R33s

RedlineGTR

Robo's

Pinoi-Boi-r33

Riceline

B1 Mr_Fanny

Wolverine

Xr8Eater

gtrGhosTDoGG11

burnfest

SydnetKid (Stagea R33)

Jay95R33 (Stagea R33)

ICE12 (Stagea R33)

SKYBEE

|PRESA|

Trust33

tridentt150v

BLakniTE

SKYNUTS

lbfalcon

GOR33

Bobjones

CMS Drifter

knore

drewecrome

halz

R33 newbie

predator

R33_KRAZY

nacional

craz0

gts-wpn

LANFOH

Babia

r0ma

NZM.031

Zebbie

MYSTR33

Race__24

abcent

R33impul

13_Devil

cd04

YogiR33

Bazr33

Terminal

gR33ddy

Total R33 = 46

R34s

ME of course

Adzmax

Daz

Muz

Abo Bob

Coxy_

GTTR34

Neo_R34

CNBLOW

HKS34R

ascension

Total R34 = 11

Total So Far 72

BASS OUT

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

plz be sure to post pics of at least one of the r32 or r33 kits fitted ..coz i've recently fitted cooler piping for FMIC and i think this pipe may not fit anymore.

Matt

Robo,

I will try my best.

Angry, the pipe splices into the standard duct, so it will definently fit.

Bobjones, Will be mandrel bend and fabricated.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...