Jump to content
SAU Community

Recommended Posts

2540 is still one week away.

GT30 and 35r's are still two weeks away.

Everyone has run out of stock so I am waiting on new arivals.

Sorry it has taken me so long to reply, I have been running the shop while the manager is sick and have been back til 8 every night. I know this is no excuse but I'll try to clear up all previous questions in my next post.

ok, i'm after a :

he needs one this week - any chance?

  • Replies 288
  • Created
  • Last Reply

Top Posters In This Topic

I am interested in a new turbo. Was thinking about Garrett GT35R what size exhaust wheel can these come in? Also what price would something bigger be GT40 or 42?

0.82 and 1.06 that I know of but there could be some more.

On the 0.82 you would get your boost coming in at around 3300-3500.

But it punches more air than stock skyline turbos so running 10 psi will feel like 16 on the standard highflow one.

A GT40R comes in 0.95 and 1.06. Only good if your engine is putting out more than 400hp by itself.

If there are some GT35r's avalaible once you find out let me know and i'll grab one off ya!

Cheers

Dave

Should be mid-late next week or early the following. Hopefully he won't stuff me around but if you say you want one, I'll get it in for you. Just say the word.

I am also interested in a GT35R with .82 exh housing.

How much would freight bo to Tassie?

"Money on the fridge wog"

Just kidding...hope you aren't greek or something lol.

I don't know how much freight would be to Tassie. You might be able to ask thepost office...I rarely have time to stop in on my busy schedule.. They are still 2 or so weeks away. Garrett have a huge order coming in.

hey mate, very interested in getting a turbo of you, just need some advice first

How much horsepower/kilowatts do you want? =210rwkw

What are you using the car for? = Street

When do you want boost roughly? = 2200/2500

Do you want power early or late in the rev range = early

What Mods you engine has or is going to have including computers or exhaust etc = 3' turbo back, pod+cai, am organising powerfc, FMIC and turbo(this is where you come in)

Obviously, what car? = R32 Gtst

Intercooled? and is it large, small, medium = will be med

Still running AFM or upgraded or no longer there = stock

Custom exhaust manifold or standard? (custom exhaust manifolds give you more options) = standard

External wastegate or internal(limited to virtually 450hp)?

It seems like people are recommending this 2530 for this setup correct ?

i know 210rwkw isnt huge, but its all i feel i really need. I was planning on high-flow but it seems like for a bit extra i can give myself much more potential in the future perhaps.. ??

TimmyC,

Check out the TD06 8cm turbo Roy is running and his results over here. Huge mid range excellent 250rwkw top end potential with what I consider very minimal lag.

The TD06 paired up with the 8cm housing is the my new turbo of choice for the rb20det.

Dan,

Can i also get a price on a 1.06 exh housing for a GT35R

** as far as i know GT35R's ARE GT35/40 <- thats the old sk00l way of talkin about them

sooky syphon wants an internally wastegated exh housing.. ie XR6T turbo...

edit: your PM box was full

Can you please advise your comments on the following as I have just through the process myself of sourcing a turbo and the feed back I've got:

GT35/40r ar0.70 and ar1.06 can be sourced with an internal wastegate rated 700hp

with ceramic ball bearings

RB25 HiFlow with the right internals is capable of 550hp

The hiflow is meant to come on boost quicker with a good mid range torque, but the GT would have the legs in the top end.

I'm being told the Hiflow has a better durability in case of backfire, better torque range for circuit racing.

The Hiflow will cost me $1,750 because of the rated internals ie bigger shaft than the GT, wheels and bearings, however unable to get the specs (all top secret stuff)

What is the cost of the GT35/40R?

Can you please advise the spec on the hi flow equipment used?

- shaft size and brand

- Wheel brand

- finished AR compressor and turbine

- type of bearings

- timing (I assume it exchange)

Dan,

Can i also get a price on a 1.06 exh housing for a GT35R

** as far as i know GT35R's ARE GT35/40 <- thats the old sk00l way of talkin about them

sooky syphon wants an internally wastegated exh housing.. ie XR6T turbo...

edit: your PM box was full

PM has been emptied...sory for that.

Also. The 35R is not the same as the 35/40. The 35R is external gate and rated at 600-650hp. The 35/40 is internal gate and rated at roughly 450hp. You can, however, make a turbo based on the XR6 exhaust combined with a 35R to make it internally gated and still rated at 650hp. But they cannot copy the Ford turbo for obvious reasons....even though they made it.

Price on the exhaust housing is about $650-700. in that size. Can't get one for around 3 months though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...