Jump to content
SAU Community

Recommended Posts

I'm not after a turbo ATM but found this pic on my PC which might help some of you guys trying to figure out what you want. Obviously there are many factors other than a power target that will dictate what you want but hopefully this will help anyway :P

  • Replies 288
  • Created
  • Last Reply

Top Posters In This Topic

Daniel,

What can your guy do for my stock GTR R32 turbos? I'm only looking for a bit more out of them (maybe 210-230kw atw) with reliability. What cost for rebuild with steel wheels, and what cost for hiflow etc? What do you recommend?

I am getting a price for you on a special turbo available now as a direct bolt on replacement for the GTR's. I asked him today and he will hopefully reply to me tomorrow. Like I said...direct bolt on, so everything just goes back where it came off. They are both twin ball bearing and rated at 300hp each. Highflows are gonna cost you $1400-$1800 depending on condition of turbos and how tough you want them. I dare say these other BB turbos will be around the $1700 mark but I will confirm tomorrow when he calls me.

do you have the garrett gt2871r in stock or turbo equivalent to this??

I asked him today about this and he is looking for me tomorrow. He thought that turbo was the same as the GT28R which is $1400. I asked him to do some more research on this one to find out what the go is. I will let you know when I do.

I asked him today about this and he is looking for me tomorrow. He thought that turbo was the same as the GT28R which is $1400. I asked him to do some more research on this one to find out what the go is. I will let you know when I do.

I believe there 2 different turbos.

Very interested if you can get them.

Thanks

NFI:confused:

Totally different turbos. The gt30 does not come in an internal gate. That combo was a GCG combo using the standard skyline exhaust housing . This combo has been proven to be very unreliable. The only other way to do it is to buy the HKS ex housing which is very pricey. The GT35/40 rated at 700hp is internal gate but only come in a 1.06 ex housing A/R at that rating. HP in a box do a 0.63 but it is not rated at 700, I think it is closer to 500-550hp.

I have done a highflow for Syphon and a GT35R for Skyrine-Dave.

I officially have no hair left!

I also want to know is the GT30 with internal gate 0.63 comparable to say a HKS2830...or do I have NFI...
No F@#%in Idea

I was looking at the horsepowerinabox one with the internal gate

I am REALLY after a direct bolt on similar to the HKS2835 I think...or maybe the HKS2830 (I may have these wrong as I have NFI...)

Sorry, I just read my last post and realized how rude I must have sounded. I didn't mean you had NFI and appologise for coming across like that. Ummm...what car is this going onto Bob. The reason I ask is because the HKS 2835 comes in T3 or T2 flange but the garrett equivalent only comes in T2.

You would probably want something like the aforementioned GT3071. It is internal gate and rated at 400-450hp, T3 flange. I am currently trying to find out how much it would cost to highflow this turbo by Garrett as this would place it well into the 500hp mark and make it a good int gate bolt on comparable to the GT30R.

Dan, you weren't rude bro...I HAVE NFI...there is no much contradicting info re turbo's that I am just over it...I know what I want.

I want a turbo that will have good response for street and occassional strip, probably a 0.63 rear housing, internal gate, bolt on no changes to any lines as they are all new...

Car is a R33GTST, rebuilt...only want to run a MAX of 14psi when i get an PFC and front mount and larger fuel pump.

So that means T3 flange, I have seen good results from the HKS 2830 from some people, but the efficiency curve according to my calcs in better suited to an RB20, where as the 2835 is better suited to the 25...

What is 400-450 in kw...I don't want a monster that comes on boost hard I want something reasonably responsive which aint gonna happen with a 1.06 rear housing...

Dan, you weren't rude bro...I HAVE NFI...there is no much contradicting info re turbo's that I am just over it...I know what I want.

I want a turbo that will have good response for street and occassional strip, probably a 0.63 rear housing, internal gate, bolt on no changes to any lines as they are all new...

Car is a R33GTST, rebuilt...only want to run a MAX of 14psi when i get an PFC and front mount and larger fuel pump.

So that means T3 flange, I have seen good results from the HKS 2830 from some people, but the efficiency curve according to my calcs in better suited to an RB20, where as the 2835 is better suited to the 25...

What is 400-450 in kw...I don't want a monster that comes on boost hard I want something reasonably responsive which aint gonna happen with a 1.06 rear housing...

That 35/40 with the 1.06 housing was actually designed and flowed to be on a 2 litre 6 cylinder engine. They reckon it should come on boost at 3200-3500 depending on whether you have the 2 or 2.5 L. I don't know how true this is and I don't want anyone to be a guinea pig for it. I would rather just ask someone who has already got one on.

As for direct bolt on, you have three options...these are:

1: Highflow

2: HKS

3: Buy a different car

HKS and Greddy and companies like that are the only ones that have made the direct bolt on stuff for Skylines in the smaller stuff with internal gate unfortunately....you might be better off waiting until they bring out their T3 range. Even then though...anything Ball bearing will have different fittings for the water and oil lines so that rules all of them out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...