Jump to content
SAU Community

Recommended Posts

hey guys i have a pair of rear calipers and rear discs for sale from a late r32 gtst coupe got them to do a brake conversion on my silvia but now im selling it so no longer needed.... $300 for the calipers and the discs including postage anywhere in oz... if there is intrest ill throw some pics up later on i dont know what size the discs are and i dont have any way of measuring them..

90% complete rb20det intake manifold inclused injectors plenum aac runners etc etc no tps but does have fuel rail and regulator and the throttle body $150

pairs of front struts inc springs $100

pairs of rear struts inc springs $150

pair of brand new KYB rear struts in the boxes still have been assembled but never used $200

r32 gtst blue dial instrument cluster with about 32k on it genuine $100

some misc front susp parts hubs and top arms etc cheap cheap tell me what u want....

R32 gtst 5 speed radiator and shroud $120

YLD32 (WILD 32) number plates QLD white with black letters slimline front and usa rear $600

235/45/17 street slicks recaps but grooved so legal?? hardly tell they are caps very well done!!!!!paid nearly $400 want $250 the pair done 1 race meeting like new very sticky !!!!!!

r32 gtst steering racks complete with hicas sensors etc from halfcuts $100

R32 gtst air con condensor needs a clean $50

will do a good deal if stuff is picked up from here in toowoomba QLD i may post somethings but not others cause of the size maybe neg on some items.... if i can think of any other stuff ill add it as i go thanks alot guys.... :(

Link to comment
https://www.sau.com.au/forums/topic/66267-r32-gtst-rear-brakes/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...