Jump to content
SAU Community

Recommended Posts

G'day guys

I am planning to buy cefiro in the future, but there are something bothering me.

I want to have better brakes and better grip.

At the moment I have aftermarket wheels off skyline with 5 stud. I really love the wheels and I would like to use them on my future cefiro.

Will the hub from s14 200 sx fit cefiro? or as s14 have 4 pot brake will the whole stub axle and hub unit of s14 200sx fit to cefiro strut and control arm?

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/66294-5-stud-wheel-pattern-on-cefiro/
Share on other sites

Id you want to use the S14 or S15 hubs you will need to get the lower control arm (should still be attached - much easier this way). This bolts straight up to the Cefiro mounts. Cefiro shocks will bolt straight on also, as will the caliper (der, its on the hub). Simple!

JK

You can also use moog ball joint. And just buy the spindle and hubs and caliper and brakes.

i am trying to sell mine as I bought the ball joints and the hubs off a s14, but only ended up using 1 hub and still have both spindles, ball joints, and the calipers and rotors, and 1 hub.

If you want em make an offer

here is a site to check out.

http://www.pdm-racing.com/products/5boltco...conversion.html

if the stock ones are stock S13 brakes which im sure they were, then couldnt u just do the upgrade pack from g-13 garage?? its like 800 or something for R33 brakes

www.garage-13.com

Speak to Alex... hes a bit of a space cadet but hes alright :rofl:

if the stock ones are stock S13 brakes which im sure they were, then couldnt u just do the upgrade pack from g-13 garage?? its like 800 or something for R33 brakes

www.garage-13.com

Speak to Alex... hes a bit of a space cadet but hes alright :rofl:

I emailed them 2 months ago about this, and a locker diff... Still haven't heard back. I'm sure their busy.. But not to hear anything back kinda annoyed me.

Can any one confirm the email address on the site is still correct?

I know that I can buy the adaptor for using r33 brakes but I want 5 stud as well as I want to use my old wheels (Volk TE-37 off my R33), I'd fallen in love with those wheels.

However I am not sure if the skyline hub will fit to the cefiro stub axle, so I need the information from you guys about this. If they fit it would be sweet.

I don't want to use the stud adaptor considering the safety.

yeah the hub from a skyline wont fit on the s13 spindle, you need to get new spindles, and I am not sure if the offset is going to be right if you try and bolt on skyline brake and spindles???

You got to go either S14, or buy upgrade hubs, which you can buy but very expensive, I had a look and decided not to as you only really temporarily fixing the problem.

As I said I have got all you need for s14 front except for 1 hub if you wanna buy, and I dont want much cash for them.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...