Jump to content
SAU Community

Recommended Posts

Hey guys,

Got my air con regassed 2 weeks ago after it was drained in Japan. Had it leak tested, etc and it was fine. Now the air con is warm and there's no gas in it. Took it back to the guy who now says the metal line from the firewall to the compressor is stuffed and leaking gas?

Wouldn't this have shown up on the leak test? How does a metal line leak anyway?

Every now and then I could smell gas coming through the vents and the dash just below the centre vents would get condensation on it. How would the gas get into the vents themselves? How do I fix this, its drving me nuts.

cheers!

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/
Share on other sites

my guess it's the tx valve metal lines dont leak unless they are corroded or bent my advice is to go to the guy who gassed it and let him know that there was a leak in the cabin of the car and it all most killed you say you just spent two days in hospital because of it. the gas is very very dangerous maby he will fix it for free ha ha

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1237592
Share on other sites

R134a is not dangerous to u so on't worry about breathing it (I wouldnt do it for fun though). The alloy pipes very rarely leak, unless some dumb arse work hardened it I would take it someware else as there are plenty of other areas to look at. Like the oring used in R12 system may be stuffed and the flexible lines arent designed for R134a.

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1241592
Share on other sites

yeah, think i'll take it to someone with more of an idea... I can't hear the compressor kicking in either I just realised so it may be something along the lines of a post further up the page of a temp sendor for the refrigerant.

I've checked all fuses and stuff, so I think this may be the problem. I'll take it in anyway...

cheers for the help guys, I don't think I inhaled too much gas so hopefully i'm okay :P

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1243017
Share on other sites

Yeah eveything is dangerous, they changed to R134a beacuse it is generally environmentally and humanly safe in reasonable quanities unlike R12 where if u were to inhale it though a lit cigarette it was the same effect as inhaling Mustard gas. I am sure the 500g inside a system would do absolutly nothing.

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1246738
Share on other sites

I guess he assumed all was ok because it was drained at some time. Not leaked.

Mine was fine then over a period of time it began to loose its icy coolness.

Eventually cooling the air so it was only slightly cooler than amb air and thats where it stayed. This happened slowly.

Initial tests showed there was no leak as it was holding pressure and appeared to work well.

This is why I had a 1/4 charge with dye (~$38 from memory) and told to drive around on it so the leak will show up easily.

Link to comment
https://www.sau.com.au/forums/topic/66453-r32-air-con-help/#findComment-1246829
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...