Jump to content
SAU Community

Recommended Posts

i smell *Sniff Sniff*.... whores , pack it up before i live tred marks on your face.

dont you just LOVE scriptwriting that sounds stolen from a powerangers episode? ff was a QUALITY film

i was driving through some hills with a friend in a 78 troopy with a trailer on the back and he double clutched, to keep the load up. i can see why there but on a drag strip i dont see much point. i guess a lack of torque..or power..dunno

i smell *Sniff Sniff*.... whores , pack it up before i live tred marks on your face.

DUDE! if your going to quote something then a word of advice, GET THE QUOTE RIGHT!

its --- "i smell *sniff* *sniff*... skanks, so pack it up before i leave tred marks on your face"

Honestly, ROFL

personally i like to be nice to my box and give it 0.5 of a second in neutral between the change... never 1 movement. the synchro synchronises (as they do) and it goes in nicely. maybe this will save me some money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...