Jump to content
SAU Community

Recommended Posts

Hi guys, I have had an ever increasing number of people ask me about tuning their car without going to a dyno. They may live too far away, not have the budget or they simply may want to do it themselves. I have accumulated a few A/F ratio meters over time. I thought to help guys out, I might rent a couple of them out. They are not too expensive to buy, but the maintenance can be relatively high, you have to clean the lambda sensor and perform calibration regularly.

So......

How many would be interested in renting one for a week for say $100? That would cover maintenance and repairs etc. What you would get is;

*a wide band lambda sensor

*long lead to reach to the tail pipe

*a clamp for holding the lambda sensor in the tail pipe

*a meter and controller with sensor preheating for accuracy

*a mount and vacuum cup for attaching the display to the windscreen

*a cigarette lighter power plug & supply

*a full set of intructions

*a laptop interface and logging software to load (not necessary for tuning)

*all mailed out to you in an aluminium case

What you don't get;

*you are doing the tuning, if you damage your engine it's your problem

*if you get busted breaking the road rules, it's your problem

*I don't have time for dial up support, maybe email would be OK though

*insurance, if you break it or loose it, you pay for it

*a lap top, you supply your own, if you want to do logging

*credit, you pay up front and there will be a deposit (not sure how much yet)

*freight, you have to pay both ways, it's light, so $10 should cover almost anywhere in Oz

*instant supply, I only have 2 suitable units and I don't want to buy more. So you may have to wait until one becomes available

*to use leaded fuel, it must be unleaded

* to send it back dirty and greasy, clean it please

*your deposit refunded until it is received in good condition

This is a survey for me to judge the response, so post away. If I get enough interest I will be ready to go in about 3 weeks, as I would have to clean, service and calibrate the 2 units.

Awsome Idea,

I was charged $50 for 15mins of driving up and down the road I was not impressed I didn't get to load it up in top gears only 2nd gear.

Have you got any Second Hand/New ForSale ?

:P

Nat

If its a brand name unit such as the Autronic model, they are expensive, i say make people leave a deposit of $500 bare minimum, just incase something happens.

Because you know what people are like, hopeless.....

If you have a quality unit for hire now, i will hire it immediately.

$100 is a fair price for a week, + return freight/post to you.

You can get some preety good wide band units off the net now for around $500-$600 with controller, which is a great price if you want to tune your own cars.

Let us know either way.

Cheers

sounds like a very good idea :cheers:

Yep, I know it's a good idea, but how many people would actually rent one for a week for $100? That's the question, if I get enough I will do it. We can then start a thread on people's experiences with tuning on road and the results they get. Should make a good reference for others.

I need a few more to make it worthwhile, so let me know:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...