Jump to content
SAU Community

Recommended Posts

Hi, I had the TE37 17 x 9 wheels on my GTR, the front is 245/40 and rear is 255/40. Today I went to bob jane to ask about new tyres, they said I can put 235 at the front and 255 and the rear. Just want to know is that safe? I'm not driving the GTR very often, coz I got a daily drive car. But I just want to know the difference between the F:235 R:255 and F:245 R:255. Anyone can help?

Also wanna ask the price with these tyres? THx!!!!

Everything I've read says that you need to have EXACTLY the same rolling radius at all 4 corners, else your ATESSA system will have a caniption fit, so that means IDENTICAL rims and tyres.

And for the sake of 10mm extra why bother? just go 245 all round.

No! No! No! The ATTESSA doesn't care about the WIDTH.

The DIAMETER should be the same, but that is NOT the same as width. So you can have 225/45/17's on the front and 255/40/17's on the rear. The rolling circumference will be the same.

:(

PS; if you had done a search you would have found plenty of posts on why this is the case.

what about the width of the WHEEL?

I'd always understood that the GTR should have equal width (and diameter) wheels and tyres front to rear? That would be pretty cool if you can just use different sized wheels/tyres.

what about the width of the WHEEL?

I'd always understood that the GTR should have equal width (and diameter) wheels and tyres front to rear? That would be pretty cool if you can just use different sized wheels/tyres.

I have driven a GTR over 200k's with the space saver spare on the front, the ATTESSA didn't even know. The torque split looked quite normal to me, I even palyed with the torque splt controller, just for fun.:cheers:

No, only tyre circumference needs to be the same as the ATTESA works on front to back wheel speed differences. So you can have those 12" wide deep dish wheels on the back, Richard, so long as the tyre circumference is the same. :cheers:

No!  No!  No!  The ATTESSA doesn't care about the WIDTH.

The DIAMETER should be the same, but that is NOT the same as width.  So you can have 225/45/17's on the front and 255/40/17's on the rear.  The rolling circumference will be the same.

:)

PS; if you had done a search you would have found plenty of posts on why this is the case.

So what that means is I still can get 255/40/17's at the rear with 235/40/17's at the front? Just have to get the width at the same size? is that what u mean?

So what that means is I still can get 255/40/17's at the rear with 235/40/17's at the front? Just have to get the width at the same size? is that what u mean?

Ah no! Perhaps a quick explanation of tyre sizes might help

235 = 235 mm wide

255 = 255 mm wide

40 = 40% of the width (that's the measurement from the outside of the tyre to the rim)

17 = 17 inches, the rim diameter

So 235 X 40% = 94 mm

And 255 X 40% = 102 mm

So they are NOT the same circumference.

If you want 255/40 on the rear (102mm) then you need 235/45 on the front (105mm). Check the alternatives with the tyre shop that you are going to buy your tyres from, they have equivalency charts (so their customers can keep their speedos accurate).:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...