Jump to content
SAU Community

Recommended Posts

still gotta plug the holes i see. did you also de-badge it? it looked unreal, especially when all i saw driving around was sil-80s and wrx's.

silver_r33, where did you get your car complied? ive seen two places, one in penrith and one in queensland. Ive been told even with shipping, its $500 cheaper to get it complied in queensland. im about 13hours from queensland.

I wanna see her at the docks when she comes in, but is that worth $500???

  • Replies 122
  • Created
  • Last Reply

Top Posters In This Topic

there are actually 6 places to get jzx100's complied, according to dotars website

DOJOBI: japs usually do less K's coz they use trains ect, for big trips. unless they play golf then that is where the higher (normal) km's come from

i would say your 99 model with 73K would be correct.

Anyone else wanna VIP stylee ducktail rear wing

There is a fair bit of stuff avail. for JZX100, incl. specialty stuff from do-luck and other well known companies.

DOJOBI: the hks 2835 is a bolt on turbo for the chaser, the gtrs would give you no lag but only 270rwkw MAX. here are some specs i found

Nissan RB26DETT 2568cc (2.6) 321hp @ 8000rpm 293lb-ft @ 4400rpm Skyline GT-R

Toyota 1JZGTE VVTi 2491cc (2.5) 290hp @ 6200rpm 278lb-ft @ 2400rpm Soarer 2.5GT-T

Toyota 2JZGTE VVTi 2997cc (3.0) 340hp @ 5600rpm 333lb-ft @ 3600rpm Supra RZ

ooo ooo. where is the ducktail wing? i like no wing, or drift wing. the one for my r33 is on the way still.

i cant manage to find anything for chasers, or JZX100s at all for that matter.

if you can link me some it would be greatly appreciated.

i was going to buy a VIP celsior so i found out all the VIP body kit makers

DIANNA

$700 bucks by the time you get it to oz, here are a few links to sites i found.

bodykits

some cool stuff

TRD

Tom's chaser, many suspension parts

D.Speed body kits

Power house AMUSE

DO-LUCK

Real Dream (great site) :rofl:

AMUSE's race JZX100

最高出力      478ps / 6260 rpm

最大トルク  57.8kg/m / 4545rpm

HKS 2837R

BOOST   1.4kg/・

実測車重   1265kg

AMUSE's street JZX100 :aroused:

最高出力     386 ps / 6570rpm

最大トルク  53.3kg/m / 4560rpm

BOOST   1.2キロ HKS 2835 pro S

実測車重   1451kg

Ahh32 - Yeah, my km probably are accurate, it's just that I've seen so many wound back odometers that I don't know what to believe anymore. I know they use more public transport in the big cities, but not all the cars come from there. Also, if you get a car from a big city with low genuine km, then you can be pretty sure it's been sitting in traffic for the majority of them. I'd rather a higher number, but have a car that had been a highway cruiser most of its life.

btw I'd be pretty happy with a measly 270rwkw from a GT-RS :rofl:

atticus - search for these words on Google to find stuff on chasers (or speak to Vindicare. He has seen every page ever created on JZXs :P) I may have got the translations wrong as I don't speak Japanese, but they're good enough translations to find pages.

Toyota = トヨタ

Mark II = マークII

Cresta = クレスタ

Chaser = チェイサー (I think)

Tourer = アラー

JZX100 = always good for finding interesting pages

1JZ & 1JZ-GTE = good for engine related stuff

I then run them all through http://babelfish.altavista.com/babelfish/

I don't know if you use Firefox instead of IE or not, but I use an extension for that which lets you translate a page from the right click menu. Otherwise, you'll have to load the babelfish page up each time you want to translate.

Also there's plenty of good stuff on Yahoo Auctions Japan.

Cheers,

Michael

Also, if you get a car from a big city with low genuine km, then you can be pretty sure it's been sitting in traffic for the majority of them. I'd rather a higher number, but have a car that had been a highway cruiser most of its life.

btw I'd be pretty happy with a measly 270rwkw from a GT-RS :D

yeah true i would much rather higway k's too.

yeah 270rwkw at 1.5bar :Bang: . plus that they make the 2835 proS :cheers: for the JZX100. the GTRS is not, but i'm sure it would still fit but. neah

still gotta plug the holes i see. did you also de-badge it? it looked unreal, especially when all i saw driving around was sil-80s and wrx's.  

silver_r33, where did you get your car complied? ive seen two places, one in penrith and one in queensland. Ive been told even with shipping, its $500 cheaper to get it complied in queensland. im about 13hours from queensland.  

I wanna see her at the docks when she comes in, but is that worth $500???

Yup need to plug them holes. I've debadged it too, so the boot needs a fill and respray. Plus i need rims, need a TRD grille, and... and... :)

I got my Chaser complied in Penrith (TGB Unique Imports) and didnt actually see it in the flesh until I picked it up from the complaince shop. From memory it was $6k including tyres, and the only option at the time. Getting it done is really a hit and miss, i had no problems with TGB (except for the delays in paperwork, but that was out of their hands).

It's such a shame your car isn't the dark green, as I've got a TRD grille on mine that I don't particularly want. I think the stock one suits it best (Everyone in Japan seems to disagree with me though :P )

I think I'll just buy one on Yahoo Japan. They go for next to nothing.

is the stock one the same as on the TRAUM chaser. cos that is the better looking one.

Yeah. The red Traum one looks like it has a debadged Tourer S grille, and the gold one looks like a debadged Tourer V grille. The pics are pretty small though, so it's a bit hard to tell. The S has some horizontal chromed bars on it whereas the V doesn't.

I found these at HKS. looks like the 2835 proS will defininetly do the job, might need to get the bigger A/R (0.68 - 0.86) though as it has already reached its rated power (420ps) at 1.2bar.

Get a look at that torque, ahh i think i will be very happy when i get my chaser.

looks like it is better than the neo6 everywhere except peak power and torque.

1JZ JZX100____________________________RB25 R34

HKS_1jz.JPGHKS_R34.JPG

hey all.... nice chaser, just want to know since we are on the topic here has anyone put on the bigger turbo yet to the 1jz-gte vvti?

How did you overcome the restriction of the stock AFM ? I read you guys are running a power fc , but the power fc does not allow you to change from AFM to MAP sensor?

Cheers

hey all.... nice chaser,  just want to know since we are on the topic here has anyone put on the bigger turbo yet to the 1jz-gte vvti?  

How did you overcome the restriction of the stock AFM ? I read you guys are running a power fc , but the power fc does not allow you to change from AFM to MAP sensor?  

Cheers

Yeah, that's going to be a bit of a challenge I think. I don't know if it will allow it or not, but a 90mm Q45 AFM might work. I'm not planning on going too big with my mods so that should work for me. When you run out of resolution on that I really don't know what you would do. I wonder why they changed from MAP in the TT 1JZ.

Ahh32 - they're nice dynos, aren't they. Those pics are what made me like the VVTi 1JZ in the first place. So much potential.

how big is the one for the 1UZ, (does it have one).

I am buying my 97 model at the end of the year, just gotta save up a few more $$$'s, no debt for me.

What are you guys doing with your CHASERS, fast family 4 door, or are some of u going to do a bit of circuit and drift work????

Guys.... just to let you know I am already heading down that direction.... and running outta ideas.... I have the 1jz-gte manual vvti soarer.... I am stuck on the AFM issue , I currently have replaced the stock AFM with a Q45 and "trying" to get it to work - the car idles like crap and keeps on boggin out.... the Q45 should be good for easily 400kw+ .... I am now hoping that the tuners can get my car to idle.... the power fc only if it had the map option for the 1jz vvti then it be all sweet.... just makes things so difficult..... if the Q45 doesnt work i am trying to see if i can find a z32 AFM to work on....

how big is the one for the 1UZ, (does it have one).  

I am buying my 97 model at the end of the year, just gotta save up a few more $$$'s, no debt for me.

What are you guys doing with your CHASERS, fast family 4 door, or are some of u going to do a bit of circuit and drift work????

No idea actually. I've always been in the Nissan world, so haven't really seen many Toyota AFMs.

My Chaser will really just be a fast family 4 door. I might go to the track one day, but no drifting for me. It's an auto though, so not really suited to track work.

Celica - that's quite a rare car you've got there. Manual non-VVTi Soarers are hard enough to find! I can't see why the Q45 AFM should cause any problems, but it is worrying to hear that it isn't going so well. I just assumed if I went for high power I'd just get a bigger AFM like you did. The Q45 is the biggest I know of too, so even if the Z32 worked, it wouldn't be as good a solution as the Q45.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...