Jump to content
SAU Community

Recommended Posts

rms is irrelevent.

Al is correct. You need to build a box with the specified volume from the manufacturer. It will sound like crap with the wrong size box. Not all 12" subs require the same volume.

If I may be so bold I might just pull you up on that comment champ.

When I design enclosures for subwoofers the T/S specs are not the only thing that I use in th PC. Power availability does have a huge impact on the design of the enclosure, as does the size of the car, the volume desired and the music styles listened too.

The most peculiar thing is that once the enclosure has been designed it often is no where near the recommended size. This is because many manufacturers often recommend the safest enclosure volume for minimal returns rather than the absolute best performing enclosure. :(

Just wanted to get that out. :P

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1259167
Share on other sites

39 leters is about the average size these days for a seald box as most subs for cars are, a seald box will allways make a sub produce more power. but on the other hand a ported or somtimes larger box will give the sub a nicer tone or note but is not done very often in cars as when you drive most of what you hear will be DOF! DOF! DOF! most peple in there teens or mid 20s dont realy care to much for tone as they prefer max volume - "if its to loud, your to old!"

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1267972
Share on other sites

hey just gonna pull you up on a few points there mate....

39 leters is about the average size these days for a seald box as most subs for cars are, a seald box will allways make a sub produce more power.

no, a sealed sub box will not produce more power. neither sub, nor enclosure will produce any power increase.

but on the other hand a ported or somtimes larger box will give the sub a nicer tone or note but is not done very often in cars as when you drive most of what you hear will be DOF! DOF! DOF! most peple in there teens or mid 20s dont realy care to much for tone as they prefer max volume - "if its to loud, your to old!"

ported/bandpass enclosures don't necessarily give a sub a nicer tone. in "most" instances, ported enclosures are used to optimise the output at or between certain frequencies. this is why you'll find most serious spl competitors using vented boxes and, lets be frank, most spl cars sound like ass when it comes to linearity and natural reproduction. vented boxes don't sound "nicer" in most respects either. while there are many drivers that sound lovely in the right ported/vented alignment, sealed designs usually offer much higher transient response (tightness/punch/impact/whatever adjective you like to use).

on one other note there, you're right in that increasing a sealed enclosure's volume will decrease Q (improve the sound.. sometimes). having said that, you shouldn't take a driver that sounds crap in a 30l enclosure and put it in a 100l box and hope it sounds good...

/end rant :)

d

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1270007
Share on other sites

  • 1 month later...

it is a known fact that a seld sab will always handel more power than a venteted one becouse the air in the box will pull the sub back faster than a ported so it dosent distort if you turn up the volume that little bit higher.

Link to comment
https://www.sau.com.au/forums/topic/67291-size-for-box/#findComment-1339736
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...