Jump to content
SAU Community

Recommended Posts

you may need one for the pod filter... the rest sounds ok cept the turbo timer.

a quick question, why do you need it?

do you thrash the living crap out of your car for the last few minutes of your way home?

They should be illegal anyway, your not spose to leave your car running without you within 3 or 5meters from it or something similar to that.

Shaun

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-100464
Share on other sites

simple.......it came with the car :(

another quick question.....the car has no cat.....now i've heard off a few people that its illegal NOT to have one, and that you can get upto a 10k fine!! :D

now the weird thing is that the car has passed the pits 3 times, and they didnt say anything about it :confused:

you rekon if I went back for the permits that they'd pick it up and that they would sticker the car until the cat is sorted?

hmmm

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-100607
Share on other sites

Ive been told the turbo timer illegality is about having something wired into your ignition. As far as boost controllers go, apparently they arent illegal but your not meant to have it within reach of the driver. eg: you have to stop the car to change the boost because its in the glove box or something.

As for cat converters, its highly illegal not to have one, and the fine can be as high as 10k. Doesnt seem to stop alot of people because the sheer difference it makes not having one is incredible.

Red17

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-100908
Share on other sites

I heard you get absolutely raped if you get caught wihout a cat. I'd get one if I were you. I also heard the fine is in the order of $10k cos your emissions would be very bad w/o a cat.

Originally posted by BoOsTeD_RB26

another quick question.....the car has no cat.....now i've heard off a few people that its illegal NOT to have one, and that you can get upto a 10k fine!! :(  

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-100933
Share on other sites

cats just require removing part of the pipe that used to have the cat there, inserting the cat in, then rewelding

they can cost up to a fair amount, depending if you want a high flow one or not

the guys at the pits may not have done an emissions test (and you were VERY lucky for not being caught as I've heard too that it's up to a 10k fine for not having one)

u and 25gtt should go and buy lotto tickets!!

radium: why does he need what? the turbo timer???

don't u have one?? they are in my opinion EXTREMELY necessary

you don't have to have booted it the last leg of your journey...if you'd have given it a bit earlier the turbo will retain it's heat fairly well since it's is generating heat

if I cane it anywhere on my journey, I always set the timer higher

...sorry if this isn't what you were referring to, and that you had to be bored shitless reading this! haha

I'm bored :(

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-100998
Share on other sites

hahah

Im bored aswell :D

just say if I was to be pulled over, couldnt I use it against them?

Just say if I were to argue that it had passed the pits 3 times and that nothing was said. My old man reckons leave it and just fight em if it does happen......hmmm

As for the other stuff....I should get off my arse and get some permits :(

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-101037
Share on other sites

my thughts precisely timmay

nah boosted, you can't say that unless you had very recently been to the pits (I think they give u a kind of immunity period after pits where you can't get touched...pretty much)

but personally I don't think you should leave it off, as they can very easily prove you wrong, and if you take them to court over it, then they're likely to give you the full fine ;)

they can very easily tell if u don't have a cat (emissions test and/or flame marks on bumper) and then 10k later you;'d wished you'd put the cat on :) or left it on, whichever way round it is :)

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-101076
Share on other sites

yeh very true

guess I'll have to do it some time

im just wonderin why the exhaust didnt have a cat in it to start with, because i thought the N1 exhausts had different sections, like cat back, front pipes etc

i just went and had a look and its just one full piece, theres no weld marks or anything for where the cat should be :eek:

wierd :)

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-101097
Share on other sites

whats this no permits for exzorsts??? I Have 1! along with airfilter permit.

My friend with a the evo 6 got permits for Xenon head lights, factory evo bonnet vents, he's brembo brakes, zorst, airfilter, pedals, guages, everything. every mod he has he's got a permit for. probably good coz cops have defected him twice b4, so he's practicaly bulletproof.

I just got my permits when i got defected, payed like i think 25 dollars, or close to that.

Link to comment
https://www.sau.com.au/forums/topic/6769-permits/#findComment-101134
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • 4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...