Jump to content
SAU Community

Recommended Posts

Hi guys,

Here's the basic stuff about the 'line:

Gunmetal colour

Auto

69k km on the clock

Boot spoiler (does that count?)

Aftermarket steering wheel

Bit of details about the car - the interior is immaculate, comes with original Nissan carpet set, stock stereo is still there and not a rip or crack in there. The body is straight with no dents except one scratch on the front bar and another on the rear bar that should be able to be buffed out. There's also a light 10cm scratch on the driver's side front guard that will need a cut and polish to get rid of.

Near new Michelin tyres on stock 16" rims.

Now here's the price tag - $9500 or near offer. If not negotiating will include 1 year of rego and 1 year AWSN warranty. Located in Sydney and can send it interstate. Freight to Adelaide/Melbourne/Brisbane is around the $500 mark. Photos are on their way PM me with offer or questions thanks. Yes I know you can buy one straight from Japan for about $8k landed (J-spec price) but you're paying a little bit more for one that's sitting here already and complied.

EDIT: yes I know my original post was posted some months earlier but I went overseas from June onwards and have left the car sitting there. It was only complied in November '05 and largely being ignored for all this time as I had other things to sort out.

Edited by mini2
Link to comment
https://www.sau.com.au/forums/topic/68454-syd-1993-r33-gts-t-sedan/
Share on other sites

Will drop to $11500 temporarily as I've found a Stagea and need the funds to buy it ASAP.

This is cheap as chips people, take advantage of this LOL. Can test it whichever way you like as I am certain the car is in excellent condition in every aspect.

$11200 No Offers.

Is this thing sold?

If not do you have any more pics you could send to [email protected]

Has it any other mods like exaust or pod filter to speak of?

The Nismo blinkers are they clear/grey or orange?

How is the A/C?

Does all the electrics work? i.e 4XWindows, mirrors.

Is this thing sold?

If not do you have any more pics you could send to [email protected]

Has it any other mods like exaust or pod filter to speak of?

The Nismo blinkers are they clear/grey or orange?

How is the A/C?

Does all the electrics work? i.e 4XWindows, mirrors.

Check PM :D

Lotsa views but not enough interest. Anyone care to tell me what's wrong with the R33?

perhaps nothing wrong with the r33 (aside from being auto and not complied), but you do have a problem answering questions (better to answer here rather than pm)

is compliance included in the price?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...