Jump to content
SAU Community

Recommended Posts

Hi guys,

Took delivery of my R34 on Thurs and boy was I excited! My excitement was shortlived because it started developing a few issues namely:

Traction control could not be switched ON

SLIP warning light was ON the whole time

Tiptronic wasn't working

Auto went into limp mode (only had 3rd gear) intermittently

The check engine light would come on intermittently

Got the car plugged into a consult machine and had quite a few errors which could not be cleared. The dealer has given me a loan car for now and will be looked at on Tuesday after the easter break :cheers:

In my spare time I've been doing a lot of research on this forum and have learnt about the shift solenoids breaking down which I do hope is not the case. I was told that these problems might have been triggered when the detailers pressure washed the engine bay causing sensors to malfunction. In the meantime all I have been doing is looking at pics of my R34 which I took on the first day. CAn't wait to get it back.

If anyone on here has had similar experiences, I wouldn't mind hearing from you. Will keep you all posted of the developments and hopefully get to meet up soon.

Cheers

Jon

P/S its a 99 model R34 GTT 4 door

Link to comment
https://www.sau.com.au/forums/topic/68534-new-r34-owner-with-problems-already/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

You don't pressure wash skyline engine bays. (I don't mean you obviously) I wouldn't be surprised that it all starts working normally when the water has all evapourated from the nooks and crannys where they sprayed it. What a dickhead move.

Sounds like the solenoids to me, just need a few more details.

When in tiptronic mode does it display the gear still, but just doesn't change?

Also when the solenoids go, the check engine light doesn't come on, just the A/T light.

The check engine light is probably from the pressure cleaning, check the sensor attached to the traction control servo on the intake manifold, if the plug has moisture inside it will trigger the check engine light.

The very worst situation is you've got solenoids that have died in combination with the coil packs, which is very likely on the R34's

when in tiptronic mode, it just displays the gears like you're still in auto. Nothing happens. The check engine light comes on when I'm in neutral, reverse and also other gears apart from D. The car was still driving normally when the AT light was not on. I only had to turn the car off and on again and the AT light would disappear. Would it still run normal if my coilpacks were F^&*ed? I'm looking on the brightside, if the coilpacks and solenoid are faulty then they will definately have to replace them under warranty! On the other hand if that were the case then I Probably won't see my car for another couple of days.....its being trucked down to Gavin Woods down the coast so I guess I'm in good hands. The dealer has been good so far and wants to get this fixed asap. Shit happens :P

I only had to turn the car off and on again and the AT light would disappear

Yeah sounds like what happened to me, that only worked so many times, until the solenoids died 100%...then that little A/T light just wouldn't go!!!

Gavin sorted my one out so no doubt he's probably the best person to send it to, he was amazed that the solenoids actually tested OK out of the g'box...but turned out that was because the fault was heat related, at room temp they were OK.

My ones were replaced under warranty...happened within 5000kms of getting the car.

I think it was a good 6 week wait for parts, I know it was a pain driving in 3rd for what felt like forever! You'll find the parts probably have good availability from Nissan NZ.

Got the skyline back today. Alls good. nothing wrong with the coilpacks or shift solenoid. Apparently one fuse was in the incorrect place (stereo installers fault possibly) and there was a fault in the secondary throttle position switch circuit. I'm glad I got it back today and hopefully fingers crossed it'll be all good from here on!

Looks like you have the pearl white there. A 1999 R34 GTT Pearl White 4 door. Can't really go wrong there.

Good to hear it's back and working although "secondary throttle position switch circuit" sounds a bit weird. Ahh well, who cares. It works now. Enjoy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...