Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 2 years later...
$140 wtf who are they kidding... Is it the rubber that is on the windscreen, like between it and the plastic? Cause mine curves at both ends

Yeah mines curved at both end too... I removed it yesterday and gonna give the clarke rubber thing a go today :D

Cool i thought it was that, i took it off yesterday and now its even more screwed. Thanks for the photos vietorious they say a thousand words, now i just have to be bothered to do it but at least the rain has stopped.

Edited by WET-25T
How did u take it off?

I sprayed my windscreen wipers on sat (was very gay with the rain cause i had to drive to get more spray paint :) ) anyways you have to take off both windscreen wipers which is easy, and in the engine bay you will see a long rubber thing going from the drivers side to passengers side which is sitting on the plastic you wanna take off.

So without breaking any of the clips take this rubber off then the plastic you want has clips holding it down so put your fingers under it and once again without breaking the clips pop it off, its not hard you just have to be careful.

I didnt paint mine and dont know what you should use.

Edited by WET-25T
  • 3 months later...
  • 3 weeks later...

I sanded mine back to get rid of bumps, then cleaned then if i can remember correctly i cleaned them with metho, then sprayed them with an undercoad that makes the paint stick better, then used matt black spray paint, or mapp black? cant remember lol.

Anyways when u go to buy it tell the guy what its for and he should be compitent to guide you in the right path.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...