Jump to content
SAU Community

Fs: 1992 Bnr32 Gtr

Nismo32R
 Share

Recommended Posts

Nismo32R Experienced

Nismo32R

Posted
Posted (edited)

Hi all

I'm planning to go back to oversea....so my car has to go~~~~!!! I bought all the parts brand new directly from Japan and all the parts were fitted by Gavin Wood at Gold Coast in QLD...and has been tuned and serviced continusly by Ben from RACEPACE in VIC after relocation. It has produced 328.5rwkw at 1.35bar on RACEPACE dyno on 24/08/2005

Performance Mods:

- A'PEXi PowerFC,

- A'PEXi AVCR,

- HKS GTSS Turbines,

- HKS Type-R Intercooler (600*300*102),

- HKS Aluminium Intercooler Piping Kit,

- HKS Fuel Delivery Kit,

- HKS 600cc Injectors,

- HKS Dump pipes,

- HKS Stainless Front Pipe,

- Nismo Fuel Pump,

- Sard Type-R Fuel Regulator,

- SplitFire Coil Packs,

- Twin Plate Clutch,

- PWR 60mm Aluminium Radiator,

- D2 Racing Coilovers (Brand New fitted on the 20th of July 2005),

- Brand New Nissan Front and Rear Upper Control Arms and Rear Subframe,

- Plus other accessories,

Compression Test was done by RACEPACE Motorsports on 4/APRIL/05

175,175,180,180,170,170

PM me for other information if you are interested......NO TIME WASTER and JOY RIDER Please

Price $33,000

635gyfa02.jpg

41713963.jpg

Edited by Nismo32R
Link to comment
https://www.sau.com.au/forums/topic/68614-fs-1992-bnr32-gtr/
Share on other sites
  • 3 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • bilbo117
      Gtr-registry.com: Now All R32/r33/r34 Gtr Details - Full Registry - Submit Photos/info

      By bilbo117 · Posted

      Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...