Jump to content
SAU Community

help - puller needed bris

Jaystar

By Jaystar,
in Queensland

 Share

Recommended Posts

Jaystar Collaborator

Jaystar

Posted
Posted

hey guys

i have just had my head off my rb20det due to it leaking and had it machined etc and put new gaskets and things on.

but at the time of removing it the puller we had did not fit to take the bottom pulley off to see the timing marks. It kept hitting on the condensor. Therefore we zip tied the timing belt to the cam pulley so that it would stay in the same spot. not thinking at the time that when we get the head back that they would have moved the cams to tdc.

So now i cant line the cam gear up and the crank isnt on tdc.

So i need a puller of some sort to get the bottom pulleys off so i can see the timing marks. i have tried a screw driver on either side to try and work it loose with no luck.

If anyone has a puller i can borrow just to get the pulley off as i am on holidays and need my car back. Otherwise you can remove it for me if you are willing to come out here. All help appreciated or advice on doing this any other way or if i can do it without taking pulleys off.

Help me out please all and i wont forget it

i am on the northside of brisbane

thanx

Jason

Link to comment
https://www.sau.com.au/forums/topic/68697-help-puller-needed-bris/
Share on other sites
The Dan Grand Master

The Dan

Posted
Posted

I will help. PM your address and I will come out tomorrow arvo with one. Only problem is the thread on the bolts I use for the nissans is wrong. I kinda just wind them in till they grab. if you want to, you can go to the bolt shop tomorrow and get two 10cm bolts that fit into the thread. if not, I can still get it off anyway.

The Dan Grand Master

The Dan

Posted
Posted

I would also be willing to help you line your marks up if you like. I have done that many of them in the last few months it's not funny.

And I mean it....it's not funny. Let me know if you need any other tools and I'll see what I can muster up.

krawler Mentor

krawler

Posted
Posted

Nah, I think you've about covered it :D

Also, using the wrong thread is ok for emergency, but I'd be getting the right bolt straight away. We dodgied mine (on VL) late one night and it partially threaded, but luckily we had a set of tap and dies on hand and remade the thread. It was the same bolt he'd been using on another mates VL with no dramas too :S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...