Jump to content
SAU Community

Recommended Posts

Can someone help me. I dont really know whats wrong with my R32 Gts-t.

I was just driving today and as i was accelerating the car was just revving in gear, as if it was in neutral. This is what i suspect it might be:

- The clutch, it smells like something is burning.

- I was suspecting it may be the gearbox fluid straight after its service.

I can drive the car but it accelerates so slow, as if its not in gear. It happened tonight and i had just got it serviced today at repco. it was driving fine until tonight. Also the HICAS light comes up when driving sometimes, does it have something to do with it?

Please someone help.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/69057-help-me-please/
Share on other sites

clutch? gears?

u will have to be more specific with the detail.

Im sorry hey, i dont really know much about cars. But all I know is that its like the car is not getting into gear properly. So basically when I try to try it moves very slowly and you car hear the car revving and getting no where.

I hope its not something big. Would this happen if the gearbox oil was low?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/69057-help-me-please/#findComment-1279223
Share on other sites

ok, thanks 34mspec. got it at the mechanics the other day and he reckons the clutch has been burnt out...which explains the smell.

So yeah he is going to give me prices on clutches available; standard, heavy duty or racing. Would anyone out there know a rough cost on these clutches?

Also do you think that the previous owner of the car may have been thrashing the skyline, hence a burnt out clutch? Or because being a 15 yr old car & turbo it would be due for a new one. I have only owned it for a month and havent really thrashed it nor do i plan to.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/69057-help-me-please/#findComment-1280649
Share on other sites

Mine is starting to do this aswell, but only under heavy load (like when accelerating from 70-100km/h on the fwy). I think ill just try to get away with it for a while longer until i can afford a new clutch.

For your info my car has never had any boost increase, so im pretty sure its just the 15 year old clutch (at least in my case)

Link to comment
https://www.sau.com.au/forums/topic/69057-help-me-please/#findComment-1280762
Share on other sites

I had to refit my stock clutch this weekend as the diaphram on my twin plate snapped in half, and it is very happy holding 200rwkw. This is a 140 000km old clutch too by the way, with original plate and no machining.

I am picking up a new xtreme 1060 pressure plate and 9(?) puck plate for 750 bucks as the twin needs a full rebuild due to the buggered diaphram and worn plates ($1200) and i am a bit sick of it for daily driving.

If money is a bit tight you can have your stock pressure plate recoed with a heavier diaphram and a button clutch for less than 350 bucks if you look around. But the you have to rip out the box to replace it :P

Link to comment
https://www.sau.com.au/forums/topic/69057-help-me-please/#findComment-1281008
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...