Jump to content
SAU Community

Recommended Posts

  • Replies 116
  • Created
  • Last Reply

Top Posters In This Topic

Well,at this point in time,SAU doesn't have a team:Race_Snooze is the only driver! Sxygtst has offered to turn a wheel for the team...and that's it? Geez,we had enough for nearly THREE teams at one point there... I think we might have to fend off rumours that "Team Skyline" has pulled a heartstring! I also know that 'Snooze is a paid up Valvebounce member,so he could choose to drive elsewhere,but he wants to represent for SAU...and gets backed by...a big bunch of pikers?!? Everyone had HEAPS of time to plan this;gotta say that I'm disappointed :D ...

Guest DIRTgarage
Well,at this point in time,SAU doesn't have a team:Race_Snooze is the only driver! Sxygtst has offered to turn a wheel for the team...and that's it? Geez,we had enough for nearly THREE teams at one point there... I think we might have to fend off rumours that "Team Skyline" has pulled a heartstring! I also know that 'Snooze is a paid up Valvebounce member,so he could choose to drive elsewhere,but he wants to represent for SAU...and gets backed by...a big bunch of pikers?!? Everyone had HEAPS of time to plan this;gotta say that I'm disappointed :D ...

Id be keen to race...being an old kart steerer...if you come and pick me up and drop me home

Id be keen to race...being an old kart steerer...if you come and pick me up and drop me home

I'm almost considering doing just that! LOL! More commitment from the Central Coast than right in our backyard...race_snooze will rip it up;at least he's guaranteed a spot as the fastest SAU'er! Unless Sxygtst joins the party,in which case,it's wide open!!

guys,MAKE SURE YOU PUT YOUR NAME TO YOUR BANK DEPOSIT when paying directly into the Valvebounce account:it'll help us know who has paid and when they paid it...So;Leech,Jester and Frink,pay attention! And pay MONEY!! Let's go!

i would rather wait to see if you have the numbers jayce as i said i would rather watch if possible and only race if you are short :P + i dont have the money at the moment by the weekend i would so anyways your choice i can bring the money on sunday or else i can just watch no biggie.

i would rather wait to see if you have the numbers jayce as i said i would rather watch if possible and only race if you are short :P + i dont have the money at the moment by the weekend i would so anyways your choice i can bring the money on sunday or else i can just watch no biggie.

Cool;I think we're covered so far,but it'd be awesome if you can come along anyway! Wanna be the "Brolly girl/Pit Chick/Grid Girl"?!?

Cool;I think we're covered so far,but it'd be awesome if you can come along anyway! Wanna be the "Brolly girl/Pit Chick/Grid Girl"?!?

no worries jayce i will bring some $$$ just in case we are short anyways.

lol maybe i can bring one of gus's fyswick costumes out to turn all you buys on thinking i am a hot 16 year old boy ready for some priest action :P

sorry gus i only used you cause i know beau would think i was picking on him if i used his name again :)

lol maybe i can bring one of gus's fyswick costumes out to turn all you buys on thinking i am a hot 16 year old boy ready for some priest action :)  

sorry gus i only used you cause i know beau would think i was picking on him if i used his name again :)

:confused: :P :bahaha: :) !!

no worries jayce i will bring some $$$ just in case we are short anyways.

lol maybe i can bring one of gus's fyswick costumes out to turn all you buys on thinking i am a hot 16 year old boy ready for some priest action :P  

nah it's fine mate, u can have your costumes back anytime you want. i never wanted the cheap hand-me-downs anyway. my girls liked em all the same though :Pimp2:

id go, if i knew how much it costs? i got other stuff to pay off but i might be able to get a bit of extra cash but when does the money need to be in by? and its a shame leighs not gonna b racing..... i wouldve loved to introduce him to the wall of tyres.... oh yeh thats right its a team thing... ma bad (only jokes leigh ;)) actually sunday might be my tekken 5 day.... hmmmmmm...... well if u guys want ill be there depending money wise

Needed to have paided online by thursday and the amount is in one of Jayces posts a bit further up. $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 $35 Sunday

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...