Jump to content
SAU Community

Plex tomorrow (4th)


Recommended Posts

I have got a medical and fitness evaluation for a job tomorrow arvo hence I can make work Wed. night:rolleyes: (thats what I'm telling work anyway)

So depending on how knackered I am and whether I can be bothered (I have more physical testing on Thursday so I might need to catch up on sleep) on the night I might head on down to the Plex.

Is anyone else planning on goin?

If so theres a 50/50 chance I'll be down there fangin the R, come up for a chat, 'cause unfortunately haven't been in the loop since the last wed. night drags I organised ages ago.

Cheers,

Ryan.

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/
Share on other sites

I wouldn't be asking for tips off me :(

I'm a follower of the "Buy a GTR and rev it till 7 or so, load up the drivetrain then jump off the clutch and change gears as fast as you can until you hit the line"

Not very scientific, difficult or perhaps even intelligent but it works for me, but then again I still haven't cracked a 12:D

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/#findComment-102181
Share on other sites

I'm gonna head down. Just had the car tuned up so with any luck i'll pull a high 13.

Gtst vspec, you should head down to race. Your doin what I did, the whole time your watching your wishing you were raceing.

Why do you need to watch first??

The only reason I did is cause I had no helmet.

I'll save ya some time, holdens pull 13's-14's, most skylines pull 14's, some do 13's, gtr's do 12's, wrx's pull 14's, mazdas do 11's-14's.

And fords, ha ha, fords.

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/#findComment-102192
Share on other sites

Thanks for the tip Hicks,

I could probably get a helmet by tommorow but I'm working till about 7:30, so I didn't want to give it a half hearted effort. The following Wednesday I will be prepared.

Hope to see you down there though.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/#findComment-102194
Share on other sites

I went down and saw a few runs from Hicks, Macka and adam32 ( I think :)

By the looks of it Hicks got into high 13's one run at 13.8 .. I think and the rest were low/mid 14's.

Macka had some sweet runs with a nice 13.06 and 13.07 and some 15.something run..

**** remember anymore :)

There was a sick speedworks 200sx but dropped a bit of white smoke on it's last run (blown turbo?).

Also saw a GTiR up against a S13 which was beating it up until half track when it basically slowed to a crawl to never come out again :)

Was a pretty good night with a all-holden burnout pad at the end.

No soarers this week, suprise suprise.

That's my recap :D

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/#findComment-103095
Share on other sites

Well It seems Macka is breathing down the necks of the GTR boys and girls now with flat 13's. Thats where I'd like to be next time round. Might be a bit harder for me without that Mack-tastic power :)

A little birdy told me the track was 'treated' reasonably tonight, something I think they should do more of since more street cars are turning up to race.

Hicks, did you get that 13.8 you were chasing?

Adam32 how did you go with the boost over 8psi?

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/#findComment-103104
Share on other sites

Well done everyone, seem's like (almost) everyone came back happy.

Hicks, what was your 60' like? Did you end up running on standard rear rims?

Macka, what was your terminal speed like? Must have been pretty good with a 12.98 1/4 and only a 2.25 60'.

adam 32, sorry to hear... give us details once you recover.

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/#findComment-103147
Share on other sites

as far as i can tell...

on my first run with soft suspension, as i changed into 2nd the centre muffler (which is very low to the ground) bounced up and smashed into the diff. there is now a considerable oil leak and im assuming power wasnt being transferred through the diff and thus the shitty time of 14.4

Link to comment
https://www.sau.com.au/forums/topic/6911-plex-tomorrow-4th/#findComment-103260
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...