Jump to content
SAU Community

Recommended Posts

195rwhp.  Stock engine exaust etc.  Fuel reg, GTR (or similar) pump, stock dump then 3inch back, and about 12psi, stock cooler also.  :)  lightweight flywheel too, which would help rwhp figures.

cool man. i got 260rwhp with rb20 bottom/ rb25 top running 8psi. lot of internal work done

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1282751
Share on other sites

260...respectable...how's the torque...does it have any lag at all? im just curious

not too much lag actually. boost comes on pretty quickly. i'm lookin for a power fc for it cause i only have the stock computer re-maped and my boost controller isn't working properly. looking to boost it 20+ psi. cause 8 jst aint enough

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1284250
Share on other sites

271rwhp RB25, Hiflowed turbo with GT28 cartridge, 9psi, wolf3d, SX fuel reg, pod, custom turb manifold, 3" full zorst, 680x300x78 FMIC, oil cooler...

Need bigger injectors for more boost, so much of my turbos potential is wasted here, anyone got any suggestions on a good injector upgrade?

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1290625
Share on other sites

271rwhp RB25, Hiflowed turbo with GT28 cartridge, 9psi, wolf3d, SX fuel reg, pod, custom turb manifold, 3" full zorst, 680x300x78 FMIC, oil cooler...

Need bigger injectors for more boost, so much of my turbos potential is wasted here, anyone got any suggestions on a good injector upgrade?

Also how do you find the wolf? Or more so the tuner?

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1290702
Share on other sites

Also how do you find the wolf?  Or more so the tuner?

I got the wolf of a user on this forum in the for sale section, it was in QLD, now it resides in NSW

It only got tuned 3 days ago, I found the tuner on the wolf website as one of the distributers - I was in a bit of a panic at first looking for tuners...

The car runs beautifully with the wolf in and tuned, with the exeption that it won't idle on a cold start but im sure thats just a tweak that needs adjusting and usually within 1 minute of driving its happy to idle at the first set of lights I hit.

I'll get that fixed up in the near future anyways.

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1290873
Share on other sites

Hi, my cefiro was just put on the dyno, its only putting out 124kw ATW, it has a RB20DET and a factory 5 speed, the only work that has been done to it is a Pod filter, 3inch exaust, GTR fuel pump and 0.7bar of boost (i think is stock)

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1308730
Share on other sites

mine makes 128 rwkw with a cat back exhaust and a GFB bleed valve on an RB20DET... hopefully soon I'll be able to fit a jaycar fuel adjuster, pulse controller and boost controller and get some better response... someday when I get time.

Till then I'm happy with the power the relatively stock car makes.

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1317909
Share on other sites

Just had mine @ XTC and it made 130rwkw with a stuffed exhaust baffle.

Got that fixed so apparently it is around the 150 mark with pod, 3 inch cat back, GFB bleed valve at 10psi.

Getting GTR cooler and 2530 soon.

really? that sounds like a lot of power for those mods? 150kw... I could understand a 130 with exhaust and a bit of boost but 150 seems a big jump in power after fixing a catback issue. you have the rb20det right?

Link to comment
https://www.sau.com.au/forums/topic/69281-cefiro-power/#findComment-1318336
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...