Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

yeh I have cam gears in mind, and I might go with the cam gears and the S-AFC. I do realise that the power fc is much better because you can adjust fuel as well as ignition, but i simply do not have the funds.

What sorta power increase would we be looking at?

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-102946
Share on other sites

I will tell you saturday after I have dialed mine in. :)

I have just fitted them this week and will be putting it on the dyno Fri/Sat to set it up properly. I have boost up, turbo back exhaust, pods, and now the cam gears. Should be pretty similar to yours. Will let you know.

Mick.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-102966
Share on other sites

Save for the power FC, it's really worth it! Midrange power is heaps now, and distances between corners seem so short. Why waste money hooking up and tuning an afc when the power fc is da bomb??? If you can afford a gtr, I'm sure you can afford a power fc. In the end you'll probably end up getting one anyway.

If you really want to spend the money now, suspension. Swaybars really help the R turn in better, and stops bodyroll. 1470kg isn't exactly light.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-102985
Share on other sites

Originally posted by BoOsTeD_RB26

orrite sweet......make sure u lemme know

what kinda power u got now?

Will let you know as soon as I do.

The other day we had 204rwkw but that was with it leaning out like crazy at the top end and with 13 odd pound. I have just today replaced the AFM which were stuffed and it has picked up heaps.

Mick.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103011
Share on other sites

Silver-Arrows: what kind of performance gains did you get?....the suspension has already been done by the way. the mods i listed were only the mods associated with the power of the car.

how much would a power fc set me back....but just the FC....not hand controller...perhaps i will consider it but i dunno..have to see.

an additional odd $700 seems alot for just the fc.....what are the benefits of the fc?

either way...im definately going to get the cam gears

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103027
Share on other sites

The FC i brought was second hand from Nengun. It was about 1300, but an additional 300 for the hand controller.

I got it tuned, but they tuned it at only 0.5 bar boost. It made a lame 160kw on all 4 wheels. The tuner selected the option of boost controller kit to on, which I don't have. That's why boost was only 0.5 bar. I fixed this today and it's running at 1 bar boost. Don't know how much power, but trust me, your brakes are going to need upgrading.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103054
Share on other sites

Originally posted by BoOsTeD_RB26

yeh brakes will be a bit of a worry :(:P  

also..was there much difference in performance from 1bar/stock ecu to 1bar/powerfc?

Oh yeah!!! :)

I love the way the car pulls away now. Before it didn't have much midrange punch. Now it just pulls away and leaves me grinning like an idiot. People give me funny looks after I've stopped and try to take in what just happened. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103311
Share on other sites

hahahaha...thats what I want to hear :(

has anyone here fitted an S-AFC to their gtr....if so what was the performance gain like?

surely an S-AFC and adjustable cam gears would give some wicked mid range?

Silver-Arrows: have you got any other mods like Cam gears?

EDIT: with the sort of power you'd be making with these sorts of mods...would the ceramic wheels in the turbos be a problem? (last long?)....keep in mind only running 1bar.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103326
Share on other sites

Little. BOV's, air filters, cat back exhaust, thincker FMIC, bigger radiator, oil cooler. Oh, I've put cable straps around the intercooler piping. They expand under load so this stops it from expanding, and spools up better. It helps. $2 for a stack of cable ties, can't complain about cost there.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103336
Share on other sites

Originally posted by BoOsTeD_RB26

EDIT: with the sort of power you'd be making with these sorts of mods...would the ceramic wheels in the turbos be a problem? (last long?)....keep in mind only running 1bar.

Should not be a problem if you stay 1 bar or under.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103367
Share on other sites

Although I believe the powerFC is a very good ECU replacement (and I was amazed at the number of options of tuning it had when my friend fired his up for the first time the other nite) I wonder how much bang for bucks it has when running the ceramic standard turbos.

I was in exact position about 3 days ago choosing between powerFC and SAFC and I got the SAFC cos I thuoght it would do almost (obviously not AS good) a job but saved around $1200 or so from a second hand powerFC. With $1200 you can do quite a lot of other shit and I'm intending to spend it on cam gears + front pipes + dump pipes.

But its all up to you.... when it comes time to get bigger turbos I'll get a powerFC then. In terms of pure power the cam gears + SAFC are more bang for bucks... the powerFC allows you to do more later and adds efficiency throughout all tuning aspects giving more balance.. but at a price.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-103503
Share on other sites

Ok finished dynoing the car last night. Took ten runs to get it right with lots of tinkering in the mean time. Got 240rwkw in the end but most impressive of all is the way that the car feels now. Smoother, far more low down throttle responce. It has over 200kw at 4200rpm. It is very toey down low. Far more responsive and much nicer to drive. It feels heaps smoother and easier to drive off boost (not that it was difficult b4 but it is way different now).

So BoOsTed go for it. It is a big difference. Well worth it. Just take your time and set them up correctly. Every car is different and needs slightly different settings.

Mick.

Link to comment
https://www.sau.com.au/forums/topic/6959-gtr-mods-what-next/#findComment-104354
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...