EOI: Boost to 10PSI for R33 $10

[benl1981]

Ok I have copper ones now. I am currently testing on other skylines.

I think it is safer if using the stock intercooler to run 9-9.5psi which is what the latest ones have been made to.

Please note these are mostly for stock cars. Please check you have the solenoid shown below otherwise this piece will not work.

If you want more boost you can easily drill out the provided piece (You will only need to take a 0.2mm bigger drill bit to make about 1-2psi increase). But it is better to run 9-9.5psi.

Ok You will get instructions I put together with illustrations on how to fit this piece and how to fit a boost gauge. And you wiill get the copper piece for $15 delivered.

Sorry about the price increase but I have broken a lot of small drill bits etc

I do have a few different size drill bits so you can let me know what boost you want to run but it will vary up to 1psi between cars so I want to really be a bit cautious and let you drill it out if you want more boost. The drill bits are only about $2 and you shouldn't break it as you will only be widening the hole a small amount

[ApacheX]

Ok I have copper ones now.  I am currently testing on other skylines.  

I think it is safer if using the stock intercooler to run 9-9.5psi which is what the latest ones have been made to.  

Please note these are mostly for stock cars.  Please check you have the solenoid shown below otherwise this piece will not work.

If you want more boost you can easily drill out the provided piece (You will only need to take a 0.2mm bigger drill bit to make about 1-2psi increase).   But it is better to run 9-9.5psi.

Ok You will get instructions I put together with illustrations on how to fit this piece and how to fit a boost gauge.  And you wiill get the copper piece for $15 delivered.

Sorry about the price increase but I have broken a lot of small drill bits etc

I do have a few different size drill bits so you can let me know what boost you want to run but it will vary up to 1psi between cars so I want to really be a bit cautious and let you drill it out if you want more boost.  The drill bits are only about $2 and you shouldn't break it as you will only be widening the hole a small amount

like this? (on right hand side)

[gtrGhosTDoGG11]

Ill take one, I have stock intercooler, will 9-10 psi be fine?

Will

[Neosaber]

Iam running 12psi on a stock intercooler in an R33 gts-t s1......is that bad?

[LANFOH]

Where in Sydney are you? Ill come and pick one up if you have any left.

[Raikkonen]

dude whats news on these bits? still got some?

[benl1981]

Yeah I do. I'll be making some more over the next few days.

Most people are happy with 9-9.5psi. Not much gain on stock cooler over this.

I can kind of tailor it to what you want slightly, but there will be a bit of variation between skylines (up to 0.5psi). All the R33s tested on have had a stock intercooler, but I guess front mount shouldn't change things too much, maybe will run slightly higher boost.

I don't recommend over 9-9.5psi on the stock exhaust either.

[gtrGhosTDoGG11]

Good news, I am waiting for two, so PM me when you have them made!

[Raikkonen]

well i'm keen on one, what is the arrow exactly pointing at in that photo? the silver metal thing? little cilinder thingy?

or...

anyway lemme know mate

[m-p]

I'm interested and would like to get one.. How can I get it? I live in Sydney and I've sent u a pm but no reply yet.. Thanks..

[m-p]

I'm interested and would like to get one.. How can I get it? I live in Sydney and have sent u a pm but no reply yet.. Thanks..

[benl1981]

Pm replied. Sorry, I will get to everyone over the next few days. I've been busy at work etc. I will make up some more over the next few days.

Due to the amount of drill bits I've broken etc and the time involved the cost will be $20 including instructions on how to fit it (and how to fit aftermarket boost gauge), the piece, and clamps.

I think it is still reasonable value as it shouldn't need adjusting (you can widen the hole easily with a drill if you want slightly more boost), looks stock, and allows you to return to stock in a minute. You also don't even need to disconnect any hoses except off the solenoid. You also don't wreck your solenoid by putting a constant earth to it (which I had before), down the track I may use it for an electronic boost control so I don't want to fry it.

[TommO]

I'd like to recommend benl1981 for being a great seller. Organised delivery of the product very fast, printed out the instructions for me in colour, and went the extra mile compared to what most sellers do.

Great, cheap product, with a decent performance gain.

Thanks again,

Tommo.

[ratedGTR]

ey, on the Ebay.com link you say the stock R33 run 4PSI under 4500RPM, is that right? i tought they run 7PSI, or is 7psi @7000rpm? correct me if im wrong.

[TommO]

ey, on the Ebay.com link you say the stock R33 run 4PSI under 4500RPM, is that right? i tought they run 7PSI, or is 7psi @7000rpm? correct me if im wrong.

: Refer to this SAU tech thread

I'm sure you can feel the power increase at 4500rpm.

Cheers,

Tommo.

[ratedGTR]

thanx TommO.

[ecl]

hi

i'm buying one this week and will be installing it on a r34

will post some feedback on it when i install it

=)

[m-p]

PM sent.. Thanks.

[gtrGhosTDoGG11]

Are they made yet?

[benl1981]

I have a few made now. I'll be replying to Pms over the weekend