Jump to content
SAU Community

RB26DETT Huffer Upgrade

gun-r32

By gun-r32,
in Engines & Forced Induction

 Share

Recommended Posts

Mik Experienced

Mik

Posted
Posted
G'day Mik, so what sort of engine did or do you have these GTRS bolted to? Im looking at just a stock motor with tomei cams bigger injectors...PFC etc...

and what revs are you getting 1 bar boost at?

Stock motor with Tomei drop in cams. On the dyno, 1 bar comes up at about 4650, but target boost comes up VERY fast from there.

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

pnblight Mentor

pnblight

Posted
Posted
ahh ok pete! I didnt know you had R34 N1's I thought they were the garrett equivilent of the HKS 2530?

anyhow Im still searching for a set of N1s or 2530s..... hmmm

I thought these were one in the same BUT i will know for sure when they come off and i will let you know as i am rapped with there around performance and believe these to be one of the best turbos for a street gtr.

Mik Experienced

Mik

Posted
Posted
I thought these were one in the same BUT i will know for sure when they come off and i will let you know as i am rapped with there around performance and believe these to be one of the best turbos for a street gtr.

Peter, do your turbos run A/R 0.60 comp housings? I'm pretty sure that the turbos that everyone calls "R34 N1" turbos only run .42 housings

pnblight Mentor

pnblight

Posted
Posted
Peter, do your turbos run A/R 0.60 comp housings? I'm pretty sure that the turbos that everyone calls "R34 N1" turbos only run .42 housings

I know i have seen a thread on here with links to a site with all the nismo turbo specs on it but i just did a search and was unable to find it.

It showed the spec to the r32n1/r33n1 and the r34n1(ball bearing) and also had a couple nismo specials in there and the R34N1 was the largest a/r ratio turbo with a 0.60compressor and a 0.64 turbine (same as the 2530). Plus a young kid in buno took a shopping list from my car and bought all the same gear (r34n1) and these are 0.60/0.64 same as mine. I will keep trying to find the thread

:)

Ants Grand Master

Ants

Posted
Posted

I'm currently getting my car tuned and I roughly want about the 300rwkw. It has the following:

Nismo R32 turbos - rated at 300ps each

RX7 Series IV Injectors - 550cc

RB20DET A/f meters

Standard fuel pump - (is going to restrict a lot of the power)

HKS Cam Gears

Will let you know how it goes.

Sydneykid Grand Master

Sydneykid

Posted
Posted
Yet everyone raves about 2530s which have similar lag

In my experience, no, they don't. A few facts, we get 1 bar out of the 2530's at under 4,000 rpm on the RB26. The GTRS moving parts (compressor, shaft and turbine) weigh 25% more than the 2530 moving parts. So there is simply no way that they can be as responsive, given all else being equal.

This experience is not unique, the 2 fastest GTR's at Tsukuba again this year where both running 2530's. If the GTRS's where as responsive and made more power, I am sure the unlimited budgets would have funded them.

:D

DAN00H Mentor

DAN00H

Posted
Posted
I'm currently getting my car tuned and I roughly want about the 300rwkw. It has the following:

Nismo R32 turbos - rated at 300ps each

RX7 Series IV Injectors - 550cc

RB20DET A/f meters  

Standard fuel pump - (is going to restrict a lot of the power)

HKS Cam Gears

Will let you know how it goes.

I've got similar to you and will be looking for about the same power :P

I've got 2530's

Sard 700cc injectors

HKS intank pump

HKS cam gears

PFC + HC

Looking to get a set of RB20/25 AFM's and HKS style split dumps then I can start to assemble it all :D

Blitz Grand Master

Blitz

Posted
Posted
Blitz...I don't think you can get the 2530KAI in T25 flange for RB26, can you?

There was a rumour that the kai kits were going to becoming available for the GTR, though admittedly I have only seen the KAI version of the 2530 available as a single item so far.

Might have a browse through the goodsmaster later.

Ants Grand Master

Ants

Posted
Posted
I've got similar to you and will be looking for about the same power :P

I've got 2530's

Sard 700cc injectors

HKS intank pump

HKS cam gears

PFC + HC

Looking to get a set of RB20/25 AFM's and HKS style split dumps then I can start to assemble it all :D

I finally got my car tuned yesterday and got some fantastic results. The power I got is 297rwkw with standard fuel pump and a/f meters. I could not believe my eyes nor could my tuner. I did however put 550cc injectors on.

The power curve is just senstational; and the car pulls like a freight train. It is very progressive and goes all the way to 8000rpm.

I'm so pleased with the results that I will get used to the power first and then add a bigger fuel pump and a/f meters later.

I will post up pictures of the power curve very shortly.

180bfj20det Community Regular

180bfj20det

Posted
Posted
I will post up pictures of the power curve very shortly.

Here is the dyno graph for Antz car. I took a pic of them yesterday. The dyno reads 10% and reads 360rwhp = 396rwhp taking into consideration10% loss. This works out to just under 300rwkW and Im sure if we were to run the car on a calibrated dyno that it would read 300rwkW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...