Jump to content
SAU Community

Recommended Posts

In my car which I recently got imported it came with a two compatible alpine headunits. One was a CD player (not MP3 I dont think) and the other one was an equaliser and Mini-disc player. All the speakers were removed prior to it being sold as well as a sub which was in the boot and also the aerial for the car (mounted in the boot i think?)

Now my problem is that it wont read any CD's. I would imagine that if it could read it, it would start playing it like normally but wouldnt be able to with the absence of the speakers. It just attempts to read it and spits it back out. Is this a compatibility issue? In that japan discs are different to aus ones? Or would you think that it would be cheaper/better to just buy a new headunit, although i would really like to keep the one I have atm.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/70597-incompatible-headunit/
Share on other sites

If it's a burnt cd try a different brand. I've found back in the olden days when cd's cost $1 that golds were the most compatible (and then later platinums too).

These days it's anyone guess what is most compatible but still, try a few different cds. Formats are international, so unless you're putting in an mp3 cd into a cd-audio deck, or a burnt cd that hasn't been finalised you should be ok.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...