Jump to content
SAU Community

Importing from AUS

Alf
 Share

Recommended Posts

Alf Proficient

Alf

Posted
Posted

I have some questions about importing a skyline from AUS to the US.

You would think that the US would be snapping up skylines but from what I've heard on US Nissan forums this isnt the case. Apparently the regulations are so tight that only a dozen or so can only be registered in the US per year.

There is hardly any businesses that import lines :cheers:

Ok the questions, Would there be any custom issues when shipping a 33 GTS25T to California?

There is no problem with shipping arrangements to Main beach cali. But what am I to expect in when it enters the US?. :Bang:

I have heard many stories about imports being cut up becoz they are illegal even tho they are not registered. :bs!: I know North America has high standards when it comes to emissions and safety. I've read on US sites saying that RHD cars are not as safe as LDH cars, I think this is just biased BS!. :usuck:

Does anyone know how the US system works.? I've read up on the procedures of importing into the US but i can't work half of it out. They use abbreviations like RI, VSP,VCP,VAS,FMVSSn HS-7 and so on.

The reason I ask about these ridiculous regulations is I may be moving to CA, USA in the near future and the last thing I want to do is leave my line behind and may bring a few more over later on. :ufo:

Link to comment
https://www.sau.com.au/forums/topic/70778-importing-from-aus/
Share on other sites
mini2 Community Regular

mini2

Posted
Posted

Their rules is quite different to our SEVS yet it's based on the same principles - allow cars that weren't released for the market in order to be driven on the road.

In order to register the 'line, it must be imported by the company that does the legalization then handle the conversion. Pretty pricey stuff...

http://www.motorex.net/

zohnny Rookie

zohnny

Posted
Posted

I'm in the US and I can tell you that it is impossible to legalize vehicles from overseas. You have to go thru all the emission test and safety test (ex. crash test, etc) which doesn't make sense at all. I was once tried to import two stroke bike (it's illegal unless 50cc) and I found that it was impossible.

If it was easy to bring cars here, you would see skyline/JDM cars everywhere. All I seen around here is the engine swap from JDM engines or clips.

Why do you want to go through all the hassle? Reason I'm saying is car is really cheap compare to Australia. For example, you can get new 350Z base model for $27k USD or new M3 for around $47k USD.

Alf Proficient

Alf

Posted
  • Author
Posted
Their rules is quite different to our SEVS yet it's based on the same principles - allow cars that weren't released for the market in order to be driven on the road.

In order to register the 'line, it must be imported by the company that does the legalization then handle the conversion. Pretty pricey stuff...

http://www.motorex.net/

The info is much appreciated. :D

The US definitely are missing out on such an awesum car. This monopoly that Motorex has is definitely pricey as I'm discovering.:goddam:

Most of the imports they have brought in have taken more than a year to get on the road. Say If i was to remove the running gear from the car and ship them over seperately as parts, as far as I know this is legal to do in the US (shipping isnt a problem for me). Would this still have to be registered under the import laws.?

If they convert it to LHD I wouldn't do it sorry but that's just wrong.

Also in theory they're right - LHD is safer for the side of the road they're on.

From the skylines I've seen legaly imported to the US, they seem to keep them RHD. :werd:

zohnny Rookie

zohnny

Posted
Posted
Most of the imports they have brought in have taken more than a year to get on the road. Say If i was to remove the running gear from the car and ship them over seperately as parts, as far as I know this is legal to do in the US (shipping isnt a problem for me). Would this still have to be registered under the import laws.?

If you know "someone" in the DMV(Department of Motor Vehicles) you might be able to register it legally. Plus I assume you need to know someone who can pass you state inspect. But if you get an accident or get pulled over by cops and if they finds out, you are in big big trouble(law suit/prison term or heavy fine)

Alf Proficient

Alf

Posted
  • Author
Posted
Why do you want to go through all the hassle? Reason I'm saying is car is really cheap compare to Australia. For example, you can get new 350Z base model for $27k USD or new M3 for around $47k USD.

Why? It's coz i'm putting so much $ and work into the car, esp the running gear. I've driven a 350Z and it's nothing like a skyline, the sentimental value and fact that it's a skyline makes it hard to part with.

When it comes to cars I'm very fussy. If I was to buy a new car I would have to pull it apart and rebuild it to suit the way I like a car to be.

PS: The RB that's being built is almost done so what ever happens it's staying in my sight.

Alf Proficient

Alf

Posted
  • Author
Posted
If you know "someone" in the DMV(Department of Motor Vehicles) you might be able to register it legally. Plus I assume you need to know someone who can pass you state inspect. But if you get an accident or get pulled over by cops and if they finds out, you are in big big trouble(law suit/prison term or heavy fine)

Thanks for the warning, will need more research on the matter :D

zohnny Rookie

zohnny

Posted
Posted
Why? It's coz i'm putting so much $ and work into the car, esp the running gear. I've driven a 350Z and it's nothing like a skyline, the sentimental value and fact that it's a skyline makes it hard to part with.

When it comes to cars I'm very fussy. If I was to buy a new car I would have to pull it apart and rebuild it to suit the way I like a car to be.

PS: The RB that's being built is almost done so what ever happens it's staying in my sight.

I wasn't trying to compare a skyline with a 350Z. I meant most of car in the US is cheaper(except skyline) than Australia. I understand your point though.

If you are bring it for temporary, I think there is way. It was something like personal use that you will be exporting after certain period like one year.(I don't remember well)

I remember reading an article in the Road and Track Magagine that the author brought Honda Jazz to the US for the cross country trip.(It took really long time).

But if you are going to staying in the US permenantly, I don't think it is possible. You might have to buy over priced motorex skyline and start again.

mini2 Community Regular

mini2

Posted
Posted

RBmotoring is another authorized importer.

However there are loopholes with the Canadian laws that allowing R33 to be registered there but whether you are allowed to drive Canadian registered cars in the US of A is another matter altogether.

It's true though, why buy a Skyline when there's Porsche, M3 and other exciting machinery that's overpriced in Australia? I'd drive those if I gonna be in the US then hop back in a Skyline once you return. Make far better financial sense too.

Alf Proficient

Alf

Posted
  • Author
Posted
It's true though, why buy a Skyline when there's Porsche, M3 and other exciting machinery that's overpriced in Australia? I'd drive those if I gonna be in the US then hop back in a Skyline once you return. Make far better financial sense too.

That's a good point.

PS:It's a permanent move.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      first time swapping rb25det into r34

      By Murray_Calavera · Posted

      This sounds like a perfect excuse to install a Haltech R3.
    • Kinkstaah
      first time swapping rb25det into r34

      By Kinkstaah · Posted

      I do believe from context he is talking about a S0/S1 R33 RB25 with associated ECU and Wiring for that, and a manual gearbox into a R34 N/A Auto. I don't have the knowledge of all the pinouts and such but my gut feeling from doing my own conversion is to use as much of the R33 stuff that you can. The "car" wiring is quite seperate from the "Engine" wiring when all things are considered. The only things to truly consider 99% of the time is the cluster, reverse lights and potentially disabling the 'not in P/N' immobilizer circuit.
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • GTSBoy
      first time swapping rb25det into r34

      By GTSBoy · Posted

      Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • WR33KD
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By WR33KD · Posted

      I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
×
×
  • Create New...