Jump to content
SAU Community

FS: HKS Hipermax II Coilover Suspension - R33 GTSt (NSW)

Endorean
 Share

Recommended Posts

Endorean Proficient

Endorean

Posted
Posted

1 x set of HKS Hipermax II Suspension for R33 GTSt in NSW

  • Purchased New
  • Travelled between 6-7000Kms
  • Height Adjustable
  • Damper Adjustable
  • Pillowball Mounts
  • HKS Spanners included
  • Damper adjuster included
  • Hasn't been used for Track, Drift or Drag only Everyday driving.
  • Reason for sale: Reverting car back to stock for sale.

Will post anywhere at Buyer's expense, if in Sydney Metro or outlining areas may consider drop off, or you come to me.

Asking $1500ono.

PM or E-mail to make an offer or if you have any questions. I've attached a stock photo.

Endorean Proficient

Endorean

Posted
  • Author
Posted
will these fit a 33 gtr ?

are they to stiff for day to day driving ?

No they are not too bad for day to day driving, but they dont fit on a R33 GTR, the rear struts have different mounting brackets.

  • 2 months later...
HKS_32R Apprentice

HKS_32R

Posted
Posted

very interested, i live in northern beaches (mona vale), just off pitwatter road, is it possible to drop them off when you come to sydney? also do you have a mobile number as i dont come online very often. thanks

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...