Jump to content
SAU Community

Recommended Posts

Checking the battery is the obvious one.

When you push start it, it generally does take a while for the RPM to go back to normal so thats not unusual. It you had problems with the coil packs it wouldnt prevent it from starting it would just cause it to misfire.

Other things to look at are:

-Starter motor

-Alternator

Just look at all the things that could prevent it from starting but not affect the car once it starts running. But I would be lead to believe that it could just be the battery.

Cheers,

Have you got an alarm with an immobiliser fitted? Depending on how the immobiliser is wired can affect if / how the car will start.

Then again, a bit more info on how it won't start eg starter doesn't work, engine spins but won't fire, etc would be a really useful guide for a well-considered diagnosis of the problem.

  • 1 month later...

hey mine wont start either? it was running perfectly fine...the battery seems to be connected properly and there seems to be power in the car because the head unit is working the tt is functioning.

But when i turn the key it makes some funny noise like a high pitch sound as if it was coming from the alarm/immobiliser. does anyone know what this could be?

i tried it again and it started! i fiddled around with the connections a bit and noticed there was heaps of acid build up on the terminal. but yeah i did forget that the mechanic said to replace the battery as there was a crack :O so i'll be getting my new battery tomorrow!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...